• Duties & Responsibilities
  • To report directly to Production Manager and work closely with him to achieve departmental objective.
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely.
  • To monitor, review and make improvement if required on all existing manufacturing processes (including MO Plant GC analysis and monitoring)
  • To study feasibility of new process and new technology to apply in our process.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To monitor/ improve process stability and process safety. Advice on process control to have more consistent quality. Reduce customer complaint.
  • To perform root cause analysis and implement corrective and preventive action for product, process and system non-conformances and to follow-up on the offences of the action taken.
  • To gather and analyses data on process, utilities and efficiency of process and plant equipment. Study and try new trial project/process.
  • To train and develop subordinated and improve competency and knowledge.
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Preferably those familiar in carrying out process engineering improvement activities.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.
  • Proficient in Microsoft Word and Excel.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• Duties & Responsibilities
  • To report directly to Production Manager/ Assistant Production Manager and work closely with him to achieve departmental objective.        
  • To ensure the company’s quality system is understood in the department and implemented.
  • To work closely with production planner to initiate Daily Production Schedule with the reference to Master Production Schedule to meet customer orders and be able to deliver timely. 
  • To monitor, review and make improvement if required on all existing manufacturing processes which including the air flow testing at spray dried plant and chimney.
  • To assist department head in month end closing and reporting.
  • To review process parameters and manufacturing log sheets. To recommend any improvements, preventive actions and corrective actions where appropriate.
  • To review daily production report and to monitor actual production against the production schedule.
  • To ensure corrective and preventive action is taken for product, process, and system non-conformances and to follow-up on the offences of the action taken.
  • To lead shift supervisor to achieve smooth and efficient running of plant to meet operation target.
  • To train and develop technicians and improve competency and knowledge.
  • To carry out audits, inspections, and HIRARC assessment.
  • To detect existing or potential health and safety hazards, gaps identification and recommend corrective and preventive measures. 
  • To maintain a safe working environment with awareness and knowledge of site EHS standards and ensure compliance with local, state and federal EHS regulations.
  • To perform any other ad-hoc task as and when required by the superior.
• Requirements
  • Candidate should possess at least a Degree in Chemical Engineering or equivalent.
  • At least 2 years related experience manufacturing environment.
  • Working experience in chemical manufacturing industry is an added advantage.
  • Computer literate in AutoCAD.
  • Experience in spray dried plant or filter bag system is an advantage.
  • Good knowledge in ISO 9001 is an added advantage.
  • Able to work beyond normal working hours when necessary.
  • Able to work independently or with minor supervision.
  • Good communication skills in English and Bahasa Malaysia, both written and spoken.

Perks & Benefits

• Medical insurance
• Miscellaneous allowance
• Gratuity
• Higher % EPF

• 職責與責任
  • 直接向生產經理/助理生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 監控、審查並根據需要對所有現有製造流程進行改進，包括噴霧乾燥設備和煙囪的氣流測試。
  • 協助部門主管完成月末結算和報告。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 審查每日生產報告並根據生產計劃監控實際生產。
  • 確保對產品、流程和系統不合格項採取糾正和預防措施，並對所採取措施的違規行為採取後續行動。
  • 帶領值班主管實現工廠平穩且有效率的運行，以達到營運目標。
  • 培訓和發展技術人員並提高能力和知識。
  • 進行審核、檢查和 HIRARC 評估。
  • 檢測現有或潛在的健康和安全隱患，識別差距並提出糾正和預防措施建議。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。
• 要求
  • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟練使用 AutoCAD 計算機。
  • 有噴霧乾燥設備或濾袋系統經驗者優先。
  • 熟悉 ISO 9001 是額外優勢。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

職責與責任

• • 直接向生產經理報告並與他密切合作以實現部門目標。
  • 確保公司的品質系統在部門內被理解並實施。
  • 與生產計劃員緊密合作，參考主生產計劃啟動每日生產計劃，以滿足客戶訂單並能夠及時交貨。
  • 根據需要對所有現有製造流程進行監控、審查和改進（包括 MO 工廠 GC 分析和監控）
  • 研究新製程、新技術在我們製程中應用的可行性。
  • 檢查製程參數和製造日誌表。在適當的情況下建議任何改進、預防措施和糾正措施。
  • 監控/提高製程穩定性和製程安全性。有關過程控制的建議，以獲得更一致的品質。減少客戶投訴。
  • 對產品、流程和系統不合格項進行根本原因分析並實施糾正和預防措施，並對所採取措施的違規行為進行追蹤。
  • 收集和分析有關流程、公用事業以及流程和工廠設備效率的數據。研究並嘗試新的試驗項目/流程。
  • 培訓和發展下屬，提高能力和知識。
  • 透過了解和了解現場 EHS 標準來維護安全的工作環境，並確保遵守地方、州和聯邦 EHS 法規。
  • 根據上級要求執行任何其他臨時任務。

要求

• • 候選人應至少擁有化學工程學位或同等學歷。
  • 至少2年製造環境相關經驗。
  • 化學製造業的工作經驗是一個額外的優勢。
  • 熟悉 ISO 9001 是額外優勢。
  • 最好熟悉執行工藝工程改進活動並管理合理的員工規模。
  • 必要時能夠在正常工作時間之外工作。
  • 能夠獨立工作或在較小的監督下工作。
  • 良好的英語和馬來語書面和口語溝通能力。
  • 精通 Microsoft Word 和 Excel。

津貼和福利

• 醫療保險
• 雜項津貼
• 小費
• 較高的 EPF 百分比

Job Responsibilities:

To achieve the monthly and yearly sales target as assigned by the management.
To execute marketing activities as directed by CSU Unit Head/ management.
To ensure all applications or enquiries are attended in a timely manner and to provide excellent customer service at all times.
To handle operational matters in accordance to departmental, company & regulatory bodies guidelines, IMS, procedures and policies.
 

Job Requirements: 

Bachelor's Degree in Business Administration or any related discipline.
Experience in Customer Service/ Credit Card Sales/ Banking or financial industry background will be an added advantage. However, fresh graduates are also welcome to apply
Computer literate and proficient in Microsoft Office.
Fluent in conversing in both English and Bahasa Melayu.
Able to start immediately is an added advantage.
6-day work week with the ability to work on shift rotations on weekends and public holidays. (Selected candidates will be entitled for rest day and off day on alternate basis)
A strong team player with good etiquette.

Perks & Benefits

• Personal leave
• Personal development opportunities

Job Summary:

We are seeking a dynamic and results-driven individual to join our team as a Sales Engineer. The primary responsibility of this role is to identify and capitalize on sales opportunities to expand our client base for parts sales while also nurturing relationships with existing customers. The ideal candidate will be adept at servicing corporate accounts, managing the full sales cycle from prospecting to closing deals, and ensuring customer satisfaction. Additionally, this role will involve handling ad-hoc tasks as assigned. If you are a motivated self-starter with a passion for sales and customer relationship management, we encourage you to apply for this exciting opportunity.

Job Scope:

• Identify and create sales opportunity to penetrate new accounts for parts sales and maintain existing products.
• Service corporate accounts & manage full sales cycles.
• Ad-hoc task assign.

Job Requirement:

• Diploma in Engineering (any)
• Prefer at least 1-3 year working experience
• Fresh grads are welcome
• Technically incline with Sales Experience in Semiconductor Industry
• Self-starter who is independent, resourceful, results oriented and high level of integrity
• Bilingual with good communication (verbal & written) & with excellent presentation skills
• Microsoft Office knowledge
• Possess own transport

Benefits:

- Working days: Monday – Friday

- Transportation claim

- Handphone claim

- Annual Leave

- Medical Leave

- Medical Claim

Job Description:

• To sell/promote Credit Cards & Aeon Member Plus Card product.
• To ensure all applications are in proper order prior to submission for approval.
• To create an opportunities and strategy to develop new sales and consistently increase individual or team achievements.
• To ensure high standard of customer service in line with the quality and standards set by the company.
• To deliver high customer-oriented service level.

Requirements: 

• Passionate and self-driven.
• Minimum SPM with 2 years sales experience.
• Fresh graduates are welcome to apply.
• Working experience in financial industry will be an advantage.
• Strong selling and negotiation skills.
• Have own transportation.
• Applicants should be Malaysian citizens or hold relevant residence status.
• Able to work on shift, public holiday and on weekends.
• Willing to travel and work independently under pressure.
• Working location will be at Queensbay Mall, Bayan Lepas 

Perks & Benefits

• Personal leave
• Open culture

 ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible for instrument calibration work. 
• Responsible for instrument measurement data analysis.
• Responsible for instrument measurement sigma improvement in PN.
• Responsible for instrument maintenance method improvement in PN.
• Responsible for set up new measurement method which required from R&D and sputter process team.
• Ensure the correct calibration among the tool. 
• Taking lead for measurement method improvement projects in PN.
• Measurement results analysis in PN.
• Analyze the machine calibration results and production measurement sigma. 
• Set up / optimize the measurement condition to reduce the measurement variation or measurement time reduction.  
• Coaching process engineer/technician to enhance their knowledge of instrument method and capability.  

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities

The role of Senior Process Engineer for Post Sputter Engineering is an exciting role in a fast paced setting involved directly in developing and qualifying new processes as well as sustaining of process  and leading the charge to ensure successful process delivery for New Product Introduction.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop processes as necessary for Post Sputter Engineering, specifically in areas of lubrication and tape polish
• Qualify new processes via running of evaluations and data collection and making interpretation with use of statistical tools
• Participate and lead the Post Sputter Engineering in New Product Introduction( NPI) task forces
• Coordinate the New Product Introduction (NPI) runs in post – sputter process area
• Documentation of processes and practices
• Use of various tools such as Minitab and Spotfire to make data driven decisions
• Participate and lead activities in FMEA , Process Verification and IMS related to post sputter process.
• Engage and work for process improvement with various teams such as Maintenance Engineering, QA and Analytics.

1. Perform equipment safety buy-off and drive machinery safety program;
   • Ensure all MAE is safe (according to site requirement) before release to production
   • Ensure all MAE equipped with hazard assessment and environmental impact assessment before release to production
2. Participates in the review of Machinery design and serve as advisor on safe machinery concept
3. Conduct EHS inspection /assessment and provide technical support;
4. Plan and conduct EHS related training to employee, visitor and contractor;
5. Liaises with external sources (regulatory, contractor, supplier etc) to identify, document, and facilitate compliance with various legal and business EHS related requirements.
6. Serves as company’s registered Safety and Health Officer (SHO) and fully assume the roles and responsibilities of SHO as stipulated in the law.
7. Analyze data, conduct trend analysis, apply problem solving methodology and formulate recommendation to drive continual improvement of EHS management system performance;
8. Interact with all level of people to help develop or revise organization's documented procedures & WI's
9. Analyzes loss control and accident reports; develops, implements and maintains procedures to minimize losses and or accidents.
10. Performing audits of system, inspect to current specifications and conformance to the ISO Standard.
11. Co-lead for EHS committee

• Drive the end-to-end process of the project assigned from project confirmation up to project completion.
• Conduct engineering site survey for solar PV system installation.
• Coordinate with designer on the design of the solar PV system including but not limited to electrical, structural, and mechanical.

• Coordinate with construction engineer to ensure implementation of solar PV system installation.
• Plan and manage material purchase and subcontract via ERP system.
• Liaise closely with inter departments involved for the project completion.
• Liaise and manage sub-contractors/vendors for their scope of works, schedules and monitoring workmanship qualities or subcontractors during installation.
• Work with internal and/or external parties such as TNB, consulting firms, local authorities licensing matters and documentation.
• Liaise and coordinate with local authorities on meter installation and grid interconnection of solar PV system.

• Coordinate and conduct test & commissioning of the solar PV system.
• Weekly reporting and new project scheduling.
• To assist on the best practices and safe work procedure for every project.
• Organize a post mortem meeting for evaluation of project results, challenges faced and provide recommendations for future improvement.
• To contribute, comply and committed toward the company Quality, Health, Safety and Environmental Management System by making sure it is full compliances to International Standard, Legal compliances, local regulations, and any code of practice.

• Minimum 3-5 years of work experience in Electrical or Construction industry
• Possess a Bachelor Degree in Engineering majoring in Electrical
• Basic electrical knowledge is essential
• Proficient knowledge in MS Office (Word, Excel, Project)
• Proficiency in utilizing translation software (e.g. Google Translate, Google Lens)
• Posses own transportation and willing to travel when required
• Able to work under pressure and meet project deadline when required
• Self-motivated and positive attitude with strong sense of responsibility and result oriented
• Good interpersonal and communication skills
• Posses own transportation and willing to travel to sites
• Able to work under pressure and meet project deadline when required
• Self-motivated and positive attitude with strong sense of responsibility and result oriented
• Good interpersonal and communication skills

The lab's function is to provide analysis and test support to the operations team, assist with regular production monitoring, troubleshoot issues as they arise, and develop new testing methods to meet evolving process or technology requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Conduct daily reliability test data analysis and reporting, including failure analysis (FA) for abnormal data
• Study and optimize test criteria based on product design
• Oversee machine/tooling buy-off, standardization, tool maintenance, and spare parts management.
• Tool optimization and new tool preparation to meet new product/technology requirements.
• Collaborate with the worldwide team to ensure consistent testing correlation
• Support other function teams for key projects.
• Manage Tool capacity
• Maintain proper documentation of work processes and procedures
• Communicate timely and effectively with relevant stakeholders
• Coach and guide technicians and operators

• Conduct site visit with follow up proposal and report to installation site and interconnection facilities.
• Possess sound knowledge in both DC & AC electrical system and IT networking with experience in design, install, troubleshoot and re-engineering.
• Prepare bill of material (BOM) for DC, LV, & MV electrical system and manage material purchase to ensure timely and adequate level of inventory until project completion.
• Provide general and technical support throughout the entire tender process.
• Initiate meeting with clients, consultants, authorities, management and cross departments from tender stage until project complete handover.
• Liaise and manage sub-contractors for their scope of works, schedules and monitoring workmanship qualities of subcontractors during installation.
• Record, implement and manage design change requirement through submittal.
• Work with internal and/or external parties such as consulting firms and authorities on licensing and permits matters and documentation.
• Liaise and coordinate with grid operator & authorities on interconnection of MV/HV electrical system to power grid.
• Experience with test & commissioning of the both DC & AC electrical system. Able to troubleshoot and rectify the problem during test & commissioning.
• Review project deliverables at every phase to ensure the project is within timeline and budget.
• Implement best practices and safe work procedure that comply to authorities rules and regulations throughout the project on site.
• Assist to organize a post mortem meeting for evaluation of project results, challenges faced and provide recommendations for future improvement.
• Well verse with technical letter writing, report, presentation, and method of statement documentation.
• To contribute, comply and committed toward the company Quality, Health, Safety and Environmental Management System by making sure it is full compliances to International Standard, Legal compliances, local regulations and any code of practice.

• Degree in Electrical Engineering.
• At least 1 year of experience in electrical industries such as electrical machinery maintenance, electrical product development, factory automation, M&E consultation, application engineering, or MV/HV equipment.
• Basic knowledge of electrical systems.
• Experience with AutoCAD.
• Experience in C&I solar projects is an advantage.
• Willingness to travel to job sites as needed.
• Must have a "car" for work-related travel and site visits.

• *Fresh graduates are encouraged to apply and kickstart their career with us!

Involved in technical and demo support for Omron products and also distributors and channel relationships and partnership collaborations across all levels, while also looking for opportunities to drive further business growth

Key responsibilities:

• Follow-up the latest development of product trend.
• Specialize and build expertise in the assigned product lines.
• Identify customer needs and propose best available product mix or value package.
• Contribute to or participate in product and application seminar with customer.
• Ability to judge the customer application based on the sample given.
• Understand market / customer demand / requirement on product and provide feedback to HQ.
• Develop and share products and technical knowledge which will help solve customer problems.
• Technically competent to support and back up Industry sales team for new applications involving Vision, Smart Sensor, Microscan, PLC, Motion, Sysmac and robot products.
• Conduct off-line and on-line product evaluation / demonstration at customer place.
• Provide system proposal to channel partners and customers.
• Submit weekly report for sample testing results and customer visits.
• To provide internal training (product knowledge sharing) to OMRON’s non-technical support staff, new recruits and channel partners.

• Designs and develops test cases to ensure coverage of internal and external customer expectations by analyzing and understanding system requirements and design specifications; applying standard test case development techniques.
• Reports tests coverage of the assigned test packages by continuously documenting test results during test execution.
• Design & execute test in manual and automated way to verify the product functionality based on requirement.
• Creates & setup the automation test environment consisting of both hardware and/or software by understanding the system configuration.
• Reports defects/failures with clear and concise description into Defect Management System (RTC or similar) by following standard defect description structure.
• Involves in defects resolution together with software developer by providing supporting information as well as retesting resolved bugs on every release.
• Work as individual contributor or technical leader to interface with internal or external customer on testing related topic.

1. To setup complex test systems/ test SW solution with new feature for product line based on PAV provided by MFI team accordingly to the following requirement:
   • Lead the project tester concept study with CoC, SE and ENG
   • To plan and design overall tester as per concept defined
   • To plan project tester budget and procurement activity
   • To track project budget and ensure equipment cost within the planned budget
   • On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
   • Release the test system according to Test system Release Procedure
   • To train and coach maintenance plan, analysis tool of breakdown causes, Test system setup guideline and test fixture and job design concept)
   • To lead standardization activity in functional area
2. To manage procurement plan with involvement of central purchasing, PIR partner and supplier. Maintain supplier performance evaluation and ensure supplier’s deliver according to technical specification.
3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team and achieve defined test coverage, make sure alignment and calibration process (such as flashing if memory, tuner alignment/ Calibration) is in line with test procedure.
4. To guide and coach engineer in technical issue.
5. General support on the following:
   • To lead and drive in TFOR/ FPY meeting to monitor daily operation test related issue.
   • To coordinate change management in process/ test approach
   • To analyze MIS data and coordinate improvement activities on test time reduction and machine
     effiency.
   • Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP
   • To setup new tool to increase setup efficiency
6. Any other TEF7 related duties assigned to.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Provide mechanical simulations and solutions for edge-cutting flash memory products.
• Develop inhouse structural simulation automation platform based on commercial softwares (e.g. ANSYS, Abaqus).
• Predict and define structural risks and mechanisms using simulation tools for electronic packaging design, assembly and reliabilities.
• Material characterization for simulation accuracy and efficiency improvement  

Join Solarvest, a leader in renewable energy solutions, committed to sustainability and innovation. We are looking for an Operations & Maintenance Executive to support our Operations and Maintenance department in ensuring efficient and smooth operations.

Key Responsibilities:

• Provide administrative support to ensure the smooth operation of the department.
• Schedule internal department meetings and record minutes.
• Handle document control tasks, including filing ISO documents, reports, receipts, and claims.
• Assist the Manager with invoice issuance and payment collection for O&M-related work.
• Support the Engineer in procuring suppliers or contractors by managing Work Order and Purchase Order requests.
• Coordinate delivery orders with the Procurement department and follow up on invoices and payments with the Finance department.
• Assist the Customer Service team in preparing daily, weekly, monthly, and yearly reports for clients.
• Manage department petty cash records and claims.
• Provide and release monthly updates on Customer Satisfaction Feedback ratings.
• Oversee the O&M inventory management system, including spare parts tracking, monthly audits, and inspections for ISO compliance.
• Manage and coordinate calibration for department tools and testing equipment.
• Assist the Manager and HR with department motor vehicle management.
• Oversee warranty management and the insurance claim process.
• Collaborate with other departments to enhance internal processes and alignment.

• Possess a Diploma, Bachelor’s Degree, or Professional Degree, preferably in Business Administration or Electrical Engineering, or equivalent.
• Knowledgeable and experienced in the Solar PV industry is an added advantage.
• Able to multi-task and work in a fast-paced environment.
• Proficient in computer literacy.
• Detail-oriented, well-organized, with good time management and filing skills.
• A quality and data-driven individual.
• Possess a valid driving license (Class D).
• Able to be based in Penang.
• Strong communication skills in both Bahasa Malaysia and English (verbally and written).
• Physically and mentally strong and fit.
• Available to work and respond on weekends and public holidays if required.
• Willing to travel or relocate.

• Quote & Debit review in Model N
• Standard order management including expedites/pull ins/cancellation/push outs.
• Support Customer's RMA & other RMA related FA support.
• Support review of account booking/backlog/billing with Sales.
• Other ad-hoc support covering free of charge sample tracking for Distis, customer questionaires & other EHS/technical matters.
• Partner with Sales to manage all Renesas communications with Distis/customers.
• Renesas contact for Distis and Sales for any other topics

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• Capacity Enterprise CE / HAMR program development in Penang
• Manufacturing Yield / Defects Improvement projects
• Product improvement iteration qualification

Regular

• Ensure timely translation of new HAMR product/process transfer from US R&D to Penang. Closely work with counterpart in R&D to develop new process / materials for performance improvements.
• Continuous Improvement of Sputter yields / productivity / high PPH for product maturity. Establish all necessary unique process controls for large volume builds based on the learning at NPI stage & HDD requirements.
• Conduct partition studies for troubleshooting root cause of high particle / low yield. Work together with the team members to take appropriate corrective actions for improvements including but not limited to implementing target sandblast criterias, process optimizations, working with target suppliers on quality improvements etc
• Work with Test yield team on Failure Analysis, understanding of various defect mechanisms of HAMR media and their relationship with sputter process / materials etc.
• Optimize sputter machine start-up & operation procedures to ensure process consistency & repeatability. Work with the team on machine start-up time reduction before media characterization activities in order to reduce downtime & improve productivity.
• Work together with Sputter Equipment team on hardware improvement projects for downtime reduction & yield improvements. Ex- sputter magpacks, different type of cathodes, disk holder designs etc.   

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis

Tasks:

• To assist with Human Resource Helpdesk daily operations involves research and resolve all associates issues and concerns and the 1st level support for basic Human Resource Shared Service Function.
• Assist in employee queries pertaining to Payroll, Over Time, Leaves and so on. 
• Support in testing of automation planned for Human Resource Shared Services.
• Assist with testing of upcoming Change Request from stake holders.

Projects:

• Human Resource Services process revision/update includes identifies opportunity to improve Human Resource Operation Services and processes.
• Document work instruction involves updating documentation or work instruction when the department receive latest procedure for a request

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide post-production and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

BROAD  FUNCTIONS : 

• Coordinate on DET testing and publish results accordingly.
• Ensure all data are uploaded to OLSPC in timely manner
• Guzik tester capacity and resources planning.
• Data analysis
• Competitor analysis and FA.

RESPONSIBILITIES : 

Regular

• Work with Sputter Process and coordinate with technicians on DET testing activities and priorities.
• Monitor DET results closely and advise sputter process for tuning accordingly whenever necessary.
• Resources and tester capacity planning in supporting all DET testing activities.
• Involve in drive build and internal component data analysis and provide valuable opinion to improve internal product performance.
• Propose DET specification to Product & Sputter group based on process capabilities for specs revision during mass production.
• Supervise and coach a group of technicians to perform routine tasks.
• Support all DET testing for internal process evaluation.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules and regulations
• DET lab 7S

Irregular

• Reference generation and head screening for new program.
• Failure analysis for magnetic related issue.
• Product to product comparison.

CONTACTS

Regular

• Sputter Process Engineering, R&D Sputter, PE and QA

 Irregular

• FA, Operation

Electronics
• Understanding of existing platforms, evaluate and select electronics platform for use in power tool applications from a wide variety of technical disciplines.
• Independently develop hardware specification document on the functional requirements of a product.
• Improve existing hardware design based on technical requirements.
• Develop/ improve technical solutions in cooperation with the project team members independently.
• Independently develop and maintain circuit design for different product.
• Independently create and maintain technical documentation.
• Independently perform functional test of test-unit.
• Independently validate and do essential improvements to the electronics to pass Bosch internal qualification.
• Independently prepare essential technical documents for electronics/ tool certification.
• Follow the project schedule according product development process.
• Support line and warranty teams for electronic device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Motor
• Independently assist / improve technical solutions in cooperation with the project team members.
• Independently assist/ improve with development of designs and processes to improve efficiencies, reduce costs, and improve quality according to project objectives.
• Collaboration of counterpart and provide cost estimates during in development projects.
• Understanding of existing motor platforms, evaluate and select motor platform for use in power tool applications from a wide variety of technical disciplines.
• Independently create and maintain technical documentation.
• Follow the project schedule according product development process.
• Support line and warranty teams for motor device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.