Total 47 job vacancies by Bosch Group

1. To setup complex test systems/ test SW solution with new feature for product line based on PAV provided by MFI team accordingly to the following requirement:
   • Lead the project tester concept study with CoC, SE and ENG
   • To plan and design overall tester as per concept defined
   • To plan project tester budget and procurement activity
   • To track project budget and ensure equipment cost within the planned budget
   • On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
   • Release the test system according to Test system Release Procedure
   • To train and coach maintenance plan, analysis tool of breakdown causes, Test system setup guideline and test fixture and job design concept)
   • To lead standardization activity in functional area
2. To manage procurement plan with involvement of central purchasing, PIR partner and supplier. Maintain supplier performance evaluation and ensure supplier’s deliver according to technical specification.
3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team and achieve defined test coverage, make sure alignment and calibration process (such as flashing if memory, tuner alignment/ Calibration) is in line with test procedure.
4. To guide and coach engineer in technical issue.
5. General support on the following:
   • To lead and drive in TFOR/ FPY meeting to monitor daily operation test related issue.
   • To coordinate change management in process/ test approach
   • To analyze MIS data and coordinate improvement activities on test time reduction and machine
     effiency.
   • Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP
   • To setup new tool to increase setup efficiency
6. Any other TEF7 related duties assigned to.

• Financial Planning and Analysis (FP&A) Tasks
  • Daily standard SAP maintenance and cost calculation (e.g. product master data, standard cost, transfer price)
  • Monthly closing (SAP FI-CO module)
  • Actual/forecast reports (cost tracking, productivity tracking; forecast analysis data base)
  • Support quotation/Investment assessment/Project calculation
  • Data base maintenance in digital platform
  • Responsibility for data quality (consistency and completeness)
    • Plausibility check of reports
    • Identification and correction of errors
• Coordination and execution of standard reporting processes
  • Ensure on time delivery of data and reports
  • Optimize reporting and process

1. Lead and motivate the team to achieve company and departmental goals: -
   a) Utilization Relative
   b) Quality indicators
   c) Cost Per Placement
   d) IDC (Internal Defect Cost)
   e) SMT Change Over
   f) Delivery Performance
   g) Safety Indicator
2. Monitor and strive to achieve Daily SMT loading based on planned schedule. To analyse attainment failure and diligently work on backlog recovery.
3. Co-ordinate with other MOEs regarding PCBA delivery related matters.
4. Actively involve in headcount hiring, planning and distribution to ensure optimum operation. Ensuring timely headcount replenishment.
5. Regularly review and work with trainer to refine operator On-Job-Training to enable trained operator quality at optimum duration.
6. Responsible for 5S, Employee Suggestion (ESS), Near miss reporting, waste reduction, LPA, OPL monitoring and closure.
7. Coach and train Production Leader, Milkrun, SMED Team and Operators for continuous improvement and personal development.
8. To lead the team on their daily duties and to conduct their annual performance appraisal.
9. Passionate in leading team for continuous improvement projects.
10. Participate/Lead Daily Leadership Routines (DLR1) meeting with leaders and operators.
11. Participate/Coordinate for any line audit preparation. Actively involve in audit findings closure.

Your contribution to something big!

Reporting to the General Counsel of SEA who is based in Singapore, you will be the 6th member of a current team of 5 lawyers serving the ASEAN region, and a part of the global Corporate Legal Services function of Bosch. This is an excellent opportunity for lawyers who wish to work with an established brand with presence across multiple jurisdictions.
 

Main Responsibilities:

•  Provide general legal advice and support to Bosch business units and legal entities in Malaysia.
•  Provide general legal advise and support and act as lead ASEAN regional lawyer for 1 or 2 business units across South East Asian countries
• Potentially provide secondary support for Indonesian business/entities.
• Identify and manage legal risks, litigation and disputes, including debt recovery matters.
•  Provide internal training on legal matters, including compliance with competition law and keep abreast of the significant changes in law impacting the business.
•  Draft and negotiate long term supply contracts, distribution agreements, product trial agreements, sponsorship agreements, e-commerce agreements etc.
• Instruct and liaise with external counsel and corporate secretarial service providers for ongoing compliance with corporate law and to set up new business units/activities in Malaysia; manage services providers and related costs.
• Manage projects and undertake other duties as assigned by the General Counsel SEA, including providing legal support to business units in other South East Asian countries from time to time.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide post-production and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

• Responsible for the procurement activities of the assigned materials which include:

          a. Responsible as main interface with more complex customer / product with
              effective coordination internally in addressing issues.
          b. Coordinate material simulation activities to meet customer order fluctuation.
          c. Study and take appropriate actions on the MRP reports after the MRP run.
          d. Provide input/updates on material delivery related issues.
          e. Ensure good material planning and expedite the right materials for smooth
              production.
           f. Update critical parts list daily.
           g. Attend daily operation meeting and attend task force calls on critical supply  
               materials.
           h. Coordinate activities with relevant parties to avoid line stoppage if the right 
               material cannot arrive on time
            i. Track and monitor supplier delivery performance.

• Constantly review the planning parameters according to business trend.
• Responsible to support the activities on inventory management to achieve monthly coverage and inventory turns including quick disposition on rejected and obsolete materials, minimize overhanging materials, work on overhanging materials claims etc.
• Strategic planning to minimize special premium cost (e.g. change of ship mode) to support situation requirement.
• Work on special freight claims and line-down claims due to delinquent supply from suppliers.
• Procure new part releases.
• Determine implementation dates of ECN (Engineering Change Notice) of both materials and software.
• Prepare report e.g. ABC analysis, inventory report etc. as and when needed.
• Support activities related to Bosch Production System (BPS), e.g. Supplier Kanban for continuous improvement.
• Able to share knowledge, guide and lead junior Planners in their daily tasks.
• Work together and support each other within LOG as well as other department.
• Support and work towards achieving the departmental goal.
• Perform any other duties assigned by the immediate superior from time to time.
• Escalate procurement issues that affect a single Value Stream (Level 1).

Tasks:

• To assist with Human Resource Helpdesk daily operations involves research and resolve all associates issues and concerns and the 1st level support for basic Human Resource Shared Service Function.
• Assist in employee queries pertaining to Payroll, Over Time, Leaves and so on. 
• Support in testing of automation planned for Human Resource Shared Services.
• Assist with testing of upcoming Change Request from stake holders.

Projects:

• Human Resource Services process revision/update includes identifies opportunity to improve Human Resource Operation Services and processes.
• Document work instruction involves updating documentation or work instruction when the department receive latest procedure for a request

• 5S Training, Assessment, Audits and 5S related activities
• Designing Posters, Preparing Communication Materials, Translation services, Video Recording and Editing
• Update Reports in Power BI
• Analyze and support Idea Management reports and follow up with line leaders for submission
• Support forum, events and workshops online or Face to Face
• Other ad-hoc administrative, special projects and tasks assigned by supervisor.

Tasks:

• To assist daily operation of the department by managing associate personal information update, employee identification creation, and profile completion.
• Manage time date related request.
• Support any ad-hoc tasks assigned by personnel admin.

Projects:

• Support automation project (Be-Savvy & Human Resource Digitalization project).
• Propose operation improvement activities (Kaizen).
• Support in work instructions and ad-hoc clean projects.

Tasks:

• Warehouse operations in Kuala Lumpur International Airport
• Warehouse Migration from incumbent to new Local Service Provider
• B-travel expense management 
• Support scrapping process in Local Distribution Centre and Automotive Distribution Centre

Projects

• Value Stream Mapping and Variable Speed Drive for warehousing process
• Spaghetti diagram for packing process
• Power Business Intelligence (Power BI) dashboards for Key Key Performance Indicator(s)
• Implement warehouse maturity standards in Local Distribution Centre and Regional Distribution Centre

Electronics
• Understanding of existing platforms, evaluate and select electronics platform for use in power tool applications from a wide variety of technical disciplines.
• Independently develop hardware specification document on the functional requirements of a product.
• Improve existing hardware design based on technical requirements.
• Develop/ improve technical solutions in cooperation with the project team members independently.
• Independently develop and maintain circuit design for different product.
• Independently create and maintain technical documentation.
• Independently perform functional test of test-unit.
• Independently validate and do essential improvements to the electronics to pass Bosch internal qualification.
• Independently prepare essential technical documents for electronics/ tool certification.
• Follow the project schedule according product development process.
• Support line and warranty teams for electronic device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Motor
• Independently assist / improve technical solutions in cooperation with the project team members.
• Independently assist/ improve with development of designs and processes to improve efficiencies, reduce costs, and improve quality according to project objectives.
• Collaboration of counterpart and provide cost estimates during in development projects.
• Understanding of existing motor platforms, evaluate and select motor platform for use in power tool applications from a wide variety of technical disciplines.
• Independently create and maintain technical documentation.
• Follow the project schedule according product development process.
• Support line and warranty teams for motor device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Position Objectives

NPI Process Technician, with guidance from Section Manager & Senior NPI Process Engineer, participating in every phases of new product sample build and having the task to data-log all activities during sample build for improvement opportunities.

Key Duties and Responsibilities

1. To assist Section Manger/Senior Process Engineer for smooth introduction of new products with all key milestones are met accordingly.

1. To assist in coordinating sample build for new projects. Report all SMT/ SIP MI/ Underfill process related problems encountered during the sample build in details.

1. To attend project meeting, take up relevant tasks and close all open points under his/ her responsibility.

1. To track the sample builds effectiveness (i.e. setup, run time, material scrap & etc.) by preparing tracking list and quality report after each sample build.

1. To manage and control material allocated for sample build, including arrangement of rejected PCBA for rework and handover of completed good PCBA to MFI.

1. To prepare and ensure complete backflush and disposal of materials after each sample build.

1. To perform AXI on sample build PCBA per request.

1. To familiar with SMT production setup instruction, instruction card and visual aid.

       9. To take up tasks as assigned by superior.

• Responsible to ensure smooth running of Bosch Production System (BPS) activities to be in line with company goals and objectives at the Value Stream area, which covers coordination, planning, implementation, effectiveness and aligned with plant BPS Vision, Mission direction and BPS Road Map deployment.
• Responsible for production line layout as per PGL concept and improvement of the line productivity and working towards improving utilization rate of the machines.
• To ensure correct application of all relevant company guidelines for production and output determination according to PGL/BPS/Lean Concepts
• Able to support workshops for Value Stream Planning (VSP)/System CIP Projects and regular/annual BPS assessment of the maturity level.
• To be responsible for production line layout and improvement of the line productivity of the employees and utilization rate of the machines.
• To be responsible for Root cause analysis and Problem solving in close cooperation with production and manufacturing teams.
• To initiate technical, organizational and changeover improvements and implement them with production associated with an improvement plan.
• To be responsible for Lean manufacturing activities incl. leading continuous improvement projects, moderate/support workshops.
• To execute any other related duties assigned by immediate supervisor from time to time with compliance related company, central and legal requirements.

Tasks:

• Assist in social media planning.
• Assist in graphic design involving posters, product flyers, video editing and photo editing.
• Support in content creation related to industry, services, products, people, company events, and holiday posts.

Project:

• Campaign management through social media (Facebook and LinkedIn).
• Brochures and posters.
• Manage newsletter, blog posts and Bosch Zunder Online.

Your contribution to something big!

• Oversee master data changes or new data entry requirements of employee data into HR Core.
• Drive the update and execution of mass HR administration processes, ensuring accuracy and efficiency.
• Administer HR-related documentation, including (but not limited to) contracts of employment, medical certificates, letters, etc.
• Manage all administrative activities within the employee life cycle, including onboarding, leaver movements, salary adjustments, promotions, personal data changes, etc.
• Consistently review and update the Standard Operating Procedure (SOP) to ensure completeness and accuracy, and implement improvements where necessary.
• Identify opportunities to enhance services and processes, focusing on efficiency, accuracy, and automation.
• Lead the input of all data related to finalizing leaver cases and new hires after payroll cutoff.
• Develop and implement process automation initiatives to streamline HR processes, reduce manual tasks, and increase operational efficiency.
• Utilize advanced Excel skills to analyze data, generate reports, and provide actionable insights to support HR decision-making.

1. Lead division/internal LOG improvement projects.
2.  Act as key user supporting both customer order and procurement planning of SAP system.
3. Troubleshoot system errors raised by both customer order and procurement planners.
4. Support SAP data cleansing activities in regular basis.
5. Analyze AA order backlog and provide status update.
6. Support EOS/EOP process improvement project as part of customer order analysis.
7. Leading new plant planning tool rollout to EDLs with training and workshop.
8. Support material simulation activities with interns to fulfill sudden demand upside/overhanging claim from/to customers.
9. Support CaPRI-SP2 long-term capacity planning project to avoid material bottleneck risk by providing early warning to supplier.
10. Prepare reports e.g. Leveling Adherence, Attainment report etc. as and when needed.
11. Support activities related to Bosch Production System (BPS), e.g. Supplier Kanban, Production Kanban, Leveling and EPEI for continuous improvement.
12. Initiate functional meeting for knowledge sharing and project status update with PDCA timeline.
13. Support and work towards achieving the departmental goal.
14. Perform any other duties assigned by immediate superior from time to time.

• Responsible in developing and reviewing the annual compensation review process which include job evaluation, salary and benefits market competitiveness benchmarking, merit increase recommendations and all other policies and guidelines related to total compensation and benefits.
• Active involvement and lead in the role out of country or worldwide compensation programs or deployment of Corporate Rewarding/Compensation strategies.
• Collaborate with internal stakeholders such as HR Business partners and Location HR, Business division leader, Senior management in designing and implementing the annual compensation and benefits plan that aligned with business objectives.
• Conduct robust market research and analysis to benchmark compensation levels, benefits, and incentive structures against industry standards and competitors for local and international compensation schemes.
• Monitor market trends and legislative changes related to compensation and benefits, providing recommendations and guidance, and ensuring compliance with local and global regulations.
• Exchange with external networking groups and rewards consultants to keep abreast of latest compensation practices and trends.
• Drive the communication, competencies and knowledge management of compensation and benefits program and its applications, ensuring users have a clear understanding of the total rewards offerings available to them.

Your contribution to something big!

This role supports the Country Process Owner (CPO) in standardizing the Operations Bill to Cash (OBC) processes for Robert Bosch Malaysia. Key responsibilities include:

1. Process Standardization: Align local OBC instructions with country-specific guidelines.
2. Customer Support: Address inquiries related to payments, invoices, and billing while guiding internal teams on processes.
3. Monthly Tasks: Prepare Debtor Ageing reports, update bank transactions, and assist with month-end closing.
4. Yearly Responsibilities: Coordinate credit limit revisions, monitor dunning indicators, and liaise with auditors.
5. Debt Management: Develop payment plans for customers, review legal documents for collections, and manage settlements.
6. Project Coordination: Engage in OBC testing, project rollouts, and handle stakeholder inquiries.
7. Additional Duties: Verify key figures, act as an IT partner, and complete other assigned tasks.

Tasks:

1. Internal & External Communication/Follow-up Tasks

• Coordinate with colleagues to update the latest information in Excel, Word documents, and PowerPoint slides.
•  Communicate externally (e.g., Proton, Honda) to obtain and update the latest information (e.g., organizational charts)

2. Business development activity

• Conduct market research: Identify potential customers by gathering information from news sources and receiving insider insights from colleagues. Create presentation slides and deliver presentations accordingly.

3. Documentation handling

• Support in preparing both soft copy and hard copy versions of agreements.

4. Sales & commercial related activity

• Regularly gather information from each business unit and compile an acquisition summary slide. This slide should include details such as awarded projects, SOP (Start of Production), parts sold, prices, as well as conduct simple calculations for the value per car and projected lifetime sales.
• Assist in collecting data and creating slides for business reports, incorporating charts, bars, and other relevant visual presentations

5. Dept administration function

• Assist in confirming the Fixed Asset Listing to ensure all assets listed have barcodes attached.

Projects:

1. Quotation handling

• When company events involving OE occur, it's necessary to engage with Bosch vendors, negotiate for lower prices, and prepare relevant documentation for the claiming process (e.g., for food catering, advertising materials for the event).

2. Business operation

• Coordinate events that involve employees from Singapore, Indonesia, Vietnam, Thailand, and Malaysia, fostering collaboration and strengthening our business operations across the region.

3. Customer services/ management

• Assist in greeting guests and resolving their issues whenever our department holds events or when senior executives visit.

4. Automotive research

• Conducting market research and contribute to the preparation of presentation slides aimed at expanding our business.

Your contribution to something big!

We are seeking an experienced and driven Sales Professional to manage our Off-Highway business based out of the Malaysian & Singapore region. In this critical role, you will be responsible for driving growth, profitability, and market share across our Independent Aftermarket, Off-Highway Specialist Dealer network, Original Equipment Supplier (OES) Customers.

Key Responsibilities:

•  Develop and implement strategic sales plans and business strategies to achieve revenue/profit targets and drive expansion into the Mining, Construction, Marine, Power Gen, and Agriculture segment in , including conducting market/competitor research, identifying key players, assessing potential for relevant products, and formulating actionable execution plans.
• Support in developing market within new segments such as non-automotive, & Performance and Transmission.
•  Manage key account relationships, customer acquisitions, and ongoing sales activities to maximize business opportunities
•  Oversee KPI tracking, analysis, and corrective actions related to turnover, profitability, pricing, and customer acquisition projects
•  Conduct regular customer visits, market analysis, and competitive intelligence gathering to identify growth opportunities
• Spearhead off-highway portfolio expansion, product coverage optimization, and competitive positioning initiatives
•  Analyze sales performance, market trends, and internal management reports to drive continuous improvement
• Ensure efficient account receivables management and on-boarding of new accounts as required
•  Collaborate cross-functionally to address market requirements, customer issues, and distributor activities

Job Overview

Setup of local SO-LCL-team as key pillar in enabling more efficient future growth for SO as well as increased independence from market for (SC) talents in Rt. Goal responsibility for these positions will be with ME/PRM1-SO.

• Generate templates and reports with data analysis tools (e.g. DAST/Spotfire/Tableau)
• Test data analysis using IT tools and statical methods
• Generate KPI reports and track KPIs
• Perform test data analysis with IT tools and statistical methods to benchmark test sites or investigate performance of new manufacturing sites.
• Coordinate Bosch internal change management, generate and track engineering change requests for semiconductor products
• Set up of product master data for new products within our international production network
• Support go-life of our global product data base
• Key user for data analysis and traceability tools (e.g. DAST/E2OPEN)
• Requalification of automotive ASICs
• Candidate is responsible for automotive IC's (integrated circuits) in our international production network
• Candidate is responsible to manage product data in series production and coordinate product issues at multiple manufacturing locations around the globe.
• The monitoring of quality and costs of the products is under the candidate's responsibility.
• Planning, controlling and supervising product data projects is also part of candidate's responsibility
• The candidate is required to coordinate manufacturing data of IC products in an international production network in cooperation with the development and manufacturing departments

At Indirect Purchasing we are responsible for the global steering of the different Material Fields. We ensure proximity to our internal customers and regional markets through the worldwide presence of our Buyers. We define the Material Field and the Supplier Strategy and implement them by the persistent work of the IBTs (Indirect Material Bundling Teams). Hereby we realize bundling potentials on the highest level. We create additional values for our internal customers by early involvement and professional structuring of the purchasing process.

• Strategic purchasing for the assigned material field “Logistics & Packaging” mainly in the country’s MY, VN, AU, KR, TH, JP and SG  – Source to Contract
• Input to and implementation of global strategies for the category by ensuring process and compliance requirements
• Build effective stakeholder relationship management - e.g. operational logistics. Increase early involvement and project coordination
• Preparation and execution of tenders (RfI / RfQ)
• Design of Negotiation Strategy and execution under competition as well as w/o competition
• Preparation and approval of purchasing decisions / contracts in accordance with the signature regulations
• Manage suppliers to ensure timely deliveries and quality compliance, incl. data quality, evaluation, contract management,
• Ensure data quality and efficiency, by increasing the rate of automated orders (e.g. eCat, Scheduling Agreements)
• Interface towards internal customers and first contact person for Indirect Purchasing
• Alignment of neutral specifications