Total 13 Others/Any level Maintenance / Repair job vacancies in Pasir Gudang

Responsibilities:

• Assist the Head of Dept.  to conduct the necessary plan to minimize the downtime for any  electrical and instrumentation facilities for Plant and building through:
• plan and develop good preventive and predictive maintenance program in order to reduce the number of unscheduled breakdown.
•  to carry out preventive and predictive maintenance, repair and maintenance work relating to electrical and instrument (e.g chillers and compressor system)
• work together with Head of Dept.  for any corrective maintenance works 
• Coordinate manpower supply by subcontractor during any scheduled or unscheduled breakdown.
• Continuously review the critical spare part list for Electrical and Instrumentation item and frequently updated it whenever its necessary.
• Report, monitor and analyze equipment performance and reliability in order to ensure production targets are met at all times and minimize plant down time 
• To ensure all the critical spare list quantity always enough thus to minimize the downtime during breakdown.
• Ensure Standby Generator Set is in good working conditions at all time.
• Perform minor repair and maintenance work for the factory building
• Develop and implement Standard Operating Procedures (SOP) and ensure that personnel is familiar with the standard and policies 

Any other duties as given by the company management 

Decision-Making Authority:

• Ensuring that the production and operations processes are delivering their intended output; 
• Ensure that the integrity of the existing management system is maintained when changes to the management system are planned and implemented;
• Report the effectiveness, suitability, performance, opportunities for improvement and/ or any problem (s) including noncompliance to regulatory requirements with regards to existing management system to Top Management;

Perks & Benefits

• Flexible working hours
• Medical insurance
• Personal leave
• Personal development opportunities

Responsibilities:

• Assist the Head of Dept.  to conduct the necessary plan to minimize the downtime for any  electrical and instrumentation facilities for Plant and building through:
• plan and develop good preventive and predictive maintenance program in order to reduce the number of unscheduled breakdown.
•  to carry out preventive and predictive maintenance, repair and maintenance work relating to electrical and instrument (e.g chillers and compressor system)
• work together with Head of Dept.  for any corrective maintenance works 
• Coordinate manpower supply by subcontractor during any scheduled or unscheduled breakdown.
• Continuously review the critical spare part list for Electrical and Instrumentation item and frequently updated it whenever its necessary.
• Report, monitor and analyze equipment performance and reliability in order to ensure production targets are met at all times and minimize plant down time 
• To ensure all the critical spare list quantity always enough thus to minimize the downtime during breakdown.
• Ensure Standby Generator Set is in good working conditions at all time.
• Perform minor repair and maintenance work for the factory building
• Develop and implement Standard Operating Procedures (SOP) and ensure that personnel is familiar with the standard and policies 

Any other duties as given by the company management 

Decision-Making Authority:

• Ensuring that the production and operations processes are delivering their intended output; 
• Ensure that the integrity of the existing management system is maintained when changes to the management system are planned and implemented;
• Report the effectiveness, suitability, performance, opportunities for improvement and/ or any problem (s) including noncompliance to regulatory requirements with regards to existing management system to Top Management;

Perks & Benefits

• Flexible working hours
• Medical insurance
• Personal leave
• Personal development opportunities

職責：

• 協助部門主管制定必要的計劃，透過以下方式最大限度地減少工廠和建築的任何電氣和儀表設施的停機時間：
• 規劃和製定良好的預防性和預測性維護計劃，以減少計劃外故障的數量。
• 進行與電氣和儀表（例如冷水機組和壓縮機系統）相關的預防性和預測性維護、維修和保養工作
• 與部門主管合作進行任何糾正性維護工作
• 在任何計劃內或計劃外故障期間協調分包商的人力供應。
• 不斷審查電氣和儀表項目的關鍵備件清單，並在必要時經常更新。
• 報告、監控和分析設備性能和可靠性，以確保始終滿足生產目標並最大限度地減少工廠停機時間
• 確保所有關鍵備件清單數量始終充足，從而最大限度地減少故障期間的停機時間。
• 確保備用發電機組始終處於良好的工作狀態。
• 對廠房進行小型維修和保養工作
• 制定並實施標準作業程序（SOP）並確保人員熟悉標準和政策

本公司管理層賦予的任何其他職責

決策權：

• 確保生產和營運流程交付預期產出；
• 確保在規劃和實施管理體系變更時保持現有管理體系的完整性；
• 向最高管理階層報告現有管理系統的有效性、適用性、績效、改善機會和/或任何問題，包括不遵守監管要求的情況；

津貼和福利

• 彈性的工作時間
• 醫療保險
• 事假
• 個人發展機會

我們是一家位於 Tanjung Langsat (Pasir Gudang) 的不銹鋼廠，有一個 BO Chargeman 職位空缺，需要以下資格和經驗。

a) 必須擁有 Suruhanjaya Tenaga (ST) 頒發的 BO 33kv Chargeman 證書，並在相關領域（特別是 33kv 變電站）擁有至少 3 年經驗。

b) 必須具備良好的技術、管理、領導、溝通和 SHE 特定技能和知識。

c) 必須具備TAMCO、Siemens、ABB和其他中壓開關設備（真空和SF）的測試和開關知識

d) 真空和SF開關櫃的維護

e) 電動馬達的測試和連接、中壓和低壓網狀原理以及電氣裝置的測試和認證。

f) 照明系統的維護和修理，配電和電力變壓器的測試和維護。

g) 發電機組維護與保養、高低壓維護及建築維護知識。

h) 電力供應法、電力法規的知識至關重要。

i) 良好的故障排除技能、電腦知識和多工處理能力。

入圍候選人面試將在 Tanjung Langsat（巴西古當）工廠進行。

我們根據合適的候選人的資格和經驗為他們提供有競爭力的薪酬。

我們是位於 Tanjung Langsat (Pasir Gudang) 的不銹鋼廠，正在招募 A4 Chargeman 職位，需要以下資格和經驗。

a) 必須擁有 Suruhanjaya Tenaga(ST) 頒發的 A4 充電員證書，以及至少 2 年相關領域（特別是 33kv 變電站）A4 充電員的工作經驗。

b) 必須具備技術、溝通（書面和口頭）和 SHE 方面的具體能力

c) 必須具備電動機的測試和連結知識

d MV 和 LV 網狀原則

e) 電氣裝置的測試和認證

f) 照明系統的維護與修理

g) 配電和電力變壓器的測試和維護

h) 發電機組維護與保養

i) HT/LV 維護與建築維護知識

j) 電力供應法、電力法規的知識至關重要

k) 良好的故障排除技巧，精通英語和馬來西亞語，懂電腦並能處理多項任務。

入圍候選人面試將在 Tanjung Langsat（巴西古當）工廠進行。

我們根據資格和經驗為合適的候選人提供非常有競爭力的薪酬。

We are a stainless steel mill in Tanjung Langsat (Pasir Gudang) and have opening for the position of A4 Chargeman, which require the following qualification and experiences.

a) must have an A4 Chargeman certificate from Suruhanjaya Tenaga(ST) and at least 2 years of working experience as A4 Chargeman in the related field particularly from 33kv electrical substation.

b) must have technical, communication (written & verbal) and SHE specific

c) must have knowledge of testing and connection of electric motors

d MV & LV reticulation principles

e) testing and certifying of electrical installations

f) maintenance and repair of lighting systems

g) distribution and power transformer testing and maintenance

h) generator set maintenance and servicing

i) HT/LV maintenance and building maintenance knowledge

j) knowledge of Electricity Supply Act, Electricity Regulations is essential

k) good troubleshooting skill, well verse in English & B Malaysia, computer literate and multi tasking.

Shortlisted candidate interview will be conducted at Tanjung Langsat (Pasir Gudang) plant.

We offer a very competitive remuneration to the right candidate base on it qualification and experience.

We are a stainless steel mill located in Tanjung Langsat (Pasir Gudang) have an opening for the position of BO Chargeman which require the following qualification and experiences.

a) must have a BO 33kv Chargeman certificate from Suruhanjaya Tenaga (ST) and have at least 3 years experience in the related field particularlyfrom 33kv electrical substation.

b) must have good technical, managerial, leadership, communication and SHE specific skills and knowledge.

c) must have good knowledge of testing and switching of TAMCO, Siemens, ABB and other MV switchgear (Vacuum & SF)

d) maintenance of vacuum and SF switchgear

e) testing and connection of electric motors, MV & LV reticulation principles and testing & certifying of electrical installations.

f) maintenance and repair of lighting systems, distribution and power transformer testing and maintenance.

g) generator set maintenance and servicing, HT/LV maintenance and building maintenance knowledge.

h) knowledge of Electricity Supply Act, Electricity Regulations is essential.

i) good troubleshooting skill, computer literate and multi tasking.

Shortlisted candidate interview will be conducted at the Tanjung Langsat (Pasir Gudang) plant.

We offer a competitive remuneration to the right candidate base on their qualification and experience.

• Perform daily plating equipment checklist to ensure all operating at its optimum efficiency.
• Execute & perform daily maintenance work as assigned by supervisor.  
• Escalate to supervisor if there are any abnormalities in equipment in operating parameter.
• Proactive in daily preventive maintenance & corrective maintenance and complete all task as per schedule.
• Record down daily preventive maintenance activities in online Digital PM.
• Ensure to follow best practice safety and quality in daily job activity.
• Spare parts management system.
• Coordinates vendor about new project.
• Internal and external equipment calibration.
• New design and improvement equipment control system.
• On call support

1. Conduct routine baking tests on samples to ensure flour quality meets standards.
2. Perform additional tests related to competitor analysis, complaints, R&D, and evaluations as assigned.
3. Report quality defects or issues to superiors promptly for resolution.
4. Accurately record and submit test results, maintaining proper documentation.
5. Continuously improve baking skills and adhere to scheduled tests.
6. Assist in product demonstrations, technical training, and sales activities.
7. To keep Customer Service Department (CSD) facilities in good condition and promptly report to superior for any sign of equipment defect or breakdown.
8. Maintain and report the condition of equipment, ensuring facilities are clean and organized.
9. Follow safety, HACCP, FSSC 22000, HALAL, and best practice procedures.
10. Protect the confidentiality of company formulations and quality data.
11. Adhere to company policies and participate in safety and quality improvement activities.
12. Support FSSC 22000 initiatives and complete additional tasks as directed by management.
     

Job Responsibilities:

• Carry out repair and maintenance of equipment to ensure productions are not interrupted and continuous improvements effort are in place for quality products.
• Assist in monitoring and daily maintenance works to reduce machinery downtime.
• Preparing roller changes for flour processing to improve flour extraction rates.
• Observe and follow all Operating Procedures and ensure safety practices are adhered to at all production areas including work and repair shop. Ensure all workers and visitors wear PPE as and when required.
• Comply with the requirements of FSSC 22000; support and participate in FSSC 22000 activities.
• To perform any other tasks and assignments as directed by management from time to time.

1. To conduct routine baking tests on milling, batching, packing sample and lab mill sample according to the plan to ensure the flour produced has been tested and the quality meets the desired standard.
2. To perform any other testing as assigned by superior in related to competitor’s flour analysis, flour streaming study, complaint, and any other R&D/evaluation.
3. To ensure the quality defect and other issue or problem is reported to superior promptly for further decision making.
4. To ensure test results are record properly on testing form with no error, submit on time for reporting purposes and filing of testing form and other documents are well maintained.
5. To continuously improve on product making skills by performing the test according the schedule set by superior.
6. To assist in product demonstration, flour technical training for customer / sales and any others sales activation activities.
7. To keep CSD facilities in good condition and promptly report to superior for any sign of equipment defect or breakdown.
8. To clean up the place and facility before end of the shift and take part in the 5S activities for the area in-charged. Ensure CSD master cleaning plan is adhered.
9. To ensure safety procedures are observed strictly at all time and to comply strictly with the requirements of HACCP, FSSC 22000, HALAL and any other Best Practices.
10. To ensure the confidentiality of Company’s wheat grist, flour formulations, wheat, and flour quality.
11. To strictly follow the company’s regulations and policies.
12. To participate in Lab MBU1 by contributes to safety observation and improvement idea.
13. To comply with the requirements of FSSC 22000 and to support and participate in FSSC 22000 activities.
14. To perform any other tasks and assignments as directed by the management from time to time.

1. To execute the internal safety and quality assurance programs & maintain the food safety management system in order to ensure compliance to ISO22000, FSSC 22000 scheme, HACCP, other regulatory and statutory requirements such as Food Act Regulation.
2. To assist & communicate customer requirement in production floor.
3. To understand the food safety policy and food safety objective. To carry out activities such as inspection, audit , control and monitoring activity at the production floor area – silo, milling, batching, packing and warehouse to ensure that the specified targets are achieved
4. To assist in internal and external audit – ISO 22000, FSSC 22000 scheme, SIRIM, HACCP, customer audit and other applicable FSMS and QMS audit.
5. To check condition and conduct inspection at bulk loading to ensure is fulfilling food safety and quality release standard.  
6. To check condition and conduct inspection at the incoming material to make sure it's fulfill the acceptance specification.
7. To check condition and conduct inspection at the prestage pallet to ensure it's fulfill both food safety and quality release standard.
8. To support and participate in all the food safety management system activities and workplace safety awareness.
9. To perform any other tasks and assignments as directed by the management from time to time.

• Total responsible for the day-to-day operation and maintenance management of the entire plant and building.
• Responsible for the operation and maintenance equipment for smooth operation of the plant, managing and leading preventive maintenance work as per schedule (CMMS) and coordinate with service/repair contractor.
• Regularly check and monitor the performance of machinery and systems to ensure they are operating within desired parameters.
• Make necessary adjustments to equipment settings or processes to optimize performance or meet operational needs.
• Record operational data such as pressure, temperature, flow rates, and production output for analysis and reporting.
• Monitoring performance, troubleshooting, maintained and determining, needed repairs and improvements.
• To coordinate, provide supports to Supervisor / Maintenance Engineer and managing external parties such consultant/contractors.
• Attend to any other duties assigned by Supervisor, Engineer and Manager.