Total 49 systems engineer job vacancies in Malaysia

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Productivity improvement project: Lead in cost saving projects such as Productivity improvement, cycle time improvement, MMR improvement, etc. to meet company goals.
• Capacity planning and analysis to meet the volume demand and maximize the plant utilization.
• Maintain IE database and lead on the IE related system project.
• Time study and time standards: Perform time study data collection and analysis, continuous improvement based on Lean concept.
• Define production layout to ensure high efficiency and ergonomic for Lean operation.
• Coordinate in tool relocation & re-layout activities.
• Resources planning for DL & IDL based on production volume targets.
• Carried out material flow & process flow analysis. Study and explore opportunity to improve current process flow, material flow, line balancing, etc.….
• Validate automation performance and capability.
• Support IE in validating offline process activity such as conversion time, kitting time, tooling preparation time, etc. and opportunity to improve the offline activities cycle time.
• Collaborate with Production, QA, Process, and Automation team to achieve Operations KPI’s
• Perform other duties as assigned.

The role of tribology engineer is to set up or develop component media mechanical interface test to simulate hard disk drive reliability performance. It is crucial to assist media R&D team to develop reliable tribology design.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Conduct advanced tribological testing and analysis using state-of-the-art equipment and methodologies
• Design and implement experimental procedures to evaluate friction, wear, and lubrication in complex mechanical systems
• Analyze test data using statistical software and develop comprehensive technical reports
• Collaborate with cross-functional teams to integrate tribological insights into product development and optimization
• Present findings and recommendations to diverse audiences, including management and global teams  
• Contribute to the development of new testing methods and equipment to enhance tribological analysis capabilities

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead PCB DFM with multi-function teams for PCB design tape out.
• Act role of PCB designer including PCB DFM for staging SSD project.
• Proceed PCB placement and PCBA proposal with consideration of mechanical process & design feedback and thermal solution.
• Perform PCB design library maintenance, PCB panel and fabrication drawing template generation and Valor ERF maintenance.
• Lead PCB design rule roadmap development with multi-function teams.
• Interface seamlessly with PCB SQE, PCB venders and HW engineer for required PCB design rule development.
• Lead project to success and on time deliverable with various manufacturing and function teams at various WDC locations for new product development and PCB design improvement.
• Deliverable of Automation program for efficiency of PCB design and DFM.

 ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible for instrument calibration work. 
• Responsible for instrument measurement data analysis.
• Responsible for instrument measurement sigma improvement in PN.
• Responsible for instrument maintenance method improvement in PN.
• Responsible for set up new measurement method which required from R&D and sputter process team.
• Ensure the correct calibration among the tool. 
• Taking lead for measurement method improvement projects in PN.
• Measurement results analysis in PN.
• Analyze the machine calibration results and production measurement sigma. 
• Set up / optimize the measurement condition to reduce the measurement variation or measurement time reduction.  
• Coaching process engineer/technician to enhance their knowledge of instrument method and capability.  

• Productivity improvement project: Lead in cost saving projects such as Productivity improvement, cycle time improvement, MMR improvement, etc. to meet company goals.
• Capacity planning and analysis to meet the volume demand and maximize the plant utilization.
• Maintain IE database and lead on the IE related system project.
• Time study and time standards: Perform time study data collection and analysis, continuous improvement based on Lean concept.
• Define production layout to ensure high efficiency and ergonomic for Lean operation.
• Coordinate in tool relocation & re-layout activities.
• Resources planning for DL & IDL based on production volume targets.
• Carried out material flow & process flow analysis. Study and explore opportunity to improve current process flow, material flow, line balancing, etc.….
• Validate automation performance and capability.
• Support IE in validating offline process activity such as conversion time, kitting time, tooling preparation time, etc. and opportunity to improve the offline activities cycle time.
• Collaborate with Production, QA, Process, and Automation team to achieve Operations KPI’s
• Perform other duties as assigned.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Design & Develop new hardware & innovative solution on sensor integration (IoT) and data mining to existing manufacturing equipment.
• Perform new sensor development and selection for data mining to IoT platform.
• Collaborate with Data Analytics team to integrate and implement large scale data solution
• Responsible to develop/sustain existing software programs, algorithms and automate data to clean and evaluate huge amount of datasets from multiple sources.
• Continue improving the acquisition system through software updates or new/improved hardware
• Documentation of systems and procedures for the setup and maintenance of hardware systems.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.

The role of Senior Process Engineer for Post Sputter Engineering is an exciting role in a fast paced setting involved directly in developing and qualifying new processes as well as sustaining of process  and leading the charge to ensure successful process delivery for New Product Introduction.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop processes as necessary for Post Sputter Engineering, specifically in areas of lubrication and tape polish
• Qualify new processes via running of evaluations and data collection and making interpretation with use of statistical tools
• Participate and lead the Post Sputter Engineering in New Product Introduction( NPI) task forces
• Coordinate the New Product Introduction (NPI) runs in post – sputter process area
• Documentation of processes and practices
• Use of various tools such as Minitab and Spotfire to make data driven decisions
• Participate and lead activities in FMEA , Process Verification and IMS related to post sputter process.
• Engage and work for process improvement with various teams such as Maintenance Engineering, QA and Analytics.

We are seeking a highly motivated, talented Software Development Engineer with knowledge in CAD software for the development and maintenance of Design Automation Infrastructure at Western Digital. Some of the job roles are summarize below:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Engage in the development of our design automation infrastructure for the mechanical design process, enhancing efficiency and accuracy.
• Utilize machine learning and data analytics techniques to optimize the design process, develop a design recommendation system, identify anomalies, and support failure analysis.
• Develop and maintain software tools to streamline simulation workflows, mitigate human error, and enhance the analysis of simulation results.

1. In this position, the individual will be responsible for fully supporting the Department Manager on the development of the Company goals, strategy, and tactics.
2. The most important being the ability to work with the team to assure the good execution.
3. The individual will work with the team to fully support the company and department goals on yield, quality, and cost, utilization, productivity, and cycle time.
4. Knowledgeable in the Burn in Oven equipment and Burn in Board and Burn In Loader unloader.
5. Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
6. Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
7. Responsible for new material/component first articles inspection and final buyoff.
8. Continuous improvement on direct/indirect material cost down & yield enhancement program.
9. Ensure robustness of process control to meet yield & thru-put expectation.
10. Report any non-conformance/customer complains issue and develop/follow up the improvement actions.
11. Fully participate to resolve the issue thru teamwork and be the main coordinator for any internal/ external audit programs.

We are seeking a highly skilled and innovative staff engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

SanDisk’s Penang SSD Platform Technology Development Integration (PTDI) organization is a SSD technology development group that will be embedded in SanDisk’s green-field production facility, SanDisk Storage Malaysia (SDSM) located in the new Batu Kawan Industrial Park, Penang, Malaysia. PTDI is looking for Process Module Engineer (Material/Process) to join a new team tasked with starting up a vertically integrated SSD-focused technology development team with the charter of developing new generations of SSD products for clients, enterprise, and emerging data storage solutions. The vertically integrated manufacturing capability of SDSM represents the most fundamental shift in completing the end-to-end manufacturing value chain for SanDisk’s solid-state NAND data storage products.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Defines IC package/SMT/SSD drive requirements, goals, and milestones for all SSD product groups and customer requirements.
• Develops SSD assembly and IC packaging material and processes to meet quality, reliability, cost, yield, productivity and manufacturing requirements.
• Develops new package and SMT process qualification programs.
• Prepares and/or updates specifications for piece parts of integrated circuits or semiconductor assemblies.
• Plans and conducts experiments to fully characterize material and processes throughout pathfinding to development to ramp.
• Develops solutions to improve quality, reliability, cost, yield, process stability/capability, productivity, and safety utilizing formal education, experience, statistical knowledge, and problem-solving tools.
• Establishes process control systems.
• Transfers process to high volume manufacturing and provide support in new factory start-up.
• Acts as a liaison with suppliers/vendors.
• Maintains product quality while developing and introducing package cost reduction programs.
• Coordinates the introduction of new package processes into production.
• Using appropriate tools, performs integrity analysis of packages.

PME Specific Role Description includes the following but not limited to:

• SMT material and process development
• SMT AI/ML integration development
• SMT technology (material/process/metrology/equipment) pathfinding & roadmap
• Stencil design/development for new components
• DFM assessment and NUDD risk management
• Process-Material-Component-board-drive interactions
• DOE & Mechanical and Material Lab Tools & Failure Analysis knowledge
• Quality Tools: FMEA, 8D, DMAIC, IPC knowledge etc.
• Statistical Tools: Statistical analysis (JMP/Minitab), GreenBelt/BlackBelt certification
• Special engineering characterization & improvement projects
• Factory emergency taskforce support

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Build next-generation web application with a focus on usability.
• Design and develop overall architecture (client-side and server-side). 
• Design and develop APIs that comply with Open-API 3.1 specification. 
• Creating database schemas that represent and support business processes. 
• Structure prototyping workgroup to prove out proposed new architectures, develop best practices and document solutions for prioritization with the engineering.
• Collaborate with cross-functional teams to independently identify, analyze, and resolve issues relating to the software development lifecycle, application development, deployment, and operations.
• Develop and integrate tool chains or other DevOps-related technologies to facilitate source control, build, and artifacts archival and delivery. 
• Oversee and modernize infrastructure and processes, ensuring optimal performance, security, and scalability.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Design, develop, test, integrate and maintain test scripts using Python to validate WD eHDD firmware and hardware features to ensure WD product meets the quality specifications using best practices like unit test, CI and Agile methodologies. 
• Collaborate with cross-functional teams to discern, strategize, and synchronize creative methods for testing firmware functionality.
• Customize test suites to align with evolving customer and firmware requirements, as well as future architectural demands.
• Contribute to failure analysis efforts aimed at enhancing firmware quality robustness.
• Collaborate on the development and refinement of internal processes to enhance overall efficiency and performance.
• Participate in Scrum & Agile processes to strategically plan, execute, and coordinate the team's activities.
• Deliver cutting-edge storage products with SAS, SATA, PCIE interfaces. 

To lead and manage RODI, IWWTP, Schedule Waste and STP operation and maintenance and ensure site operation complying to all legal requirements and inspections by local authorities are fully complied for Sarawak Plant 1 and Plant 2.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• To lead and manage a group of RODI, IWWTP, Schedule Waste and STP outsource team and ensure site operation complying to all legal requirements and inspections by local authorities are fully complied for Sarawak Plant 1 and Plant 2
• To supervise and monitor the performance of the contractors. To make sure WESTERN DIGITAL’s rules and regulations are obeyed by the contractors.
• Liaison with engineering / production personnel on the RODI quality, consumption and IWWTP discharge waste and volume.
• Management of reliability, quality, cost, and safety in RODI, IWWTP, Schedule Waste and STP systems.
• To troubleshoot and solve problems of RODI, IWWTP, Schedule Waste and STP related issues at plant and at production floor.
• To manage the RODI, IWWTP, Schedule Waste and STP calibration of all the related equipment / instruments and unit operation of the plant.
• To lead, manage and provide timely report for facility operation of RODI, IWWTP, Schedule Waste and STP monitoring parameters.
• To always ensure that IMS System or any other certifications compliance.
• To prepare, maintain and update the up-to-date documentation for RODI, IWWTP, Schedule Waste and STP.
• To plan, monitor and execute preventive maintenance for RODI, IWWTP, Schedule Waste and STP.
• To involve, coordinate and follow-up on upgrading projects. Involvement in the planning, installation, commissioning and ensuring the project being carried out according to the requirements spelled out.
• To optimize & improve RODI system operations resulting in lower utilities & chemical consumption.
• To carry out assessment & benchmark against JO water usage in effort to reduce overall SWK water withdrawn, leading to improve sustainability.
• Continuous improvement at all wastewater and related areas that will benefit in term of treatment system efficiency treated wastewater discharge stability (in term of quality) and waste reduction. Monitoring of treatment process performance & plant optimization.
• Breakdown Issue/crisis (upset) management at off working hours, weekend, and public holiday.

In this position, the individual will be responsible for fully supporting the Department Manager on the development of the Company goals, strategy and tactics. The most important being the ability to work with the team to assure the good execution. The individual will work with the team to fully support the company and department goals.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
• Support Automation and development for new automatic and robotic equipment qualification and sustaining.
• Support the Production Line. Report online machine status and issue to reporting manager
• Follow daily/shiftly line issue and production support for automation equipment.
• Continuous improvement on direct/indirect material cost down, UPH, MTBA, and MTBF enhancement program.
• Ensure automation equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Perform automation equipment conversion and set up. Observe 6S on daily job to ensure the continued and smooth production line.
• Able to conduct trainings to Operator/technicians on machine operation and skill improvement.
• Able to replace spare parts and machine buy off.
• Experience in automation equipment’s
• Manage engineer’s logistic needs.
• Any other duties assigned from time base on schedule and unscheduled activities
• Participate in productivity improvement, Lean, Kaizen and similar activities and provide manufacturing process optimization solution

Process Development owner at BOP Process such as Package saw/ Laser mark/ Solder ball attached- SBA/UBA & EMI etc. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Define the process window and recipe baseline by using JMP DOE approach.
• Good in problem solving and work on the Root Cause Analysis/Finding using, 5 whys, DMAIC, 8D approach/methodology.
• Work closely with Cross site’s Package development team to understand the Package Design Rules & Requirements
• Ensure smooth transition from Development to new product qualification phase.
• Work closely with manufacturing process and equipment team, and cross site process development team.
• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective handshake/pass over of process for New device/product introduction to the production line and new process technology capabilities development.
• Responsible for new material/component first article inspection and final buyoff.
• Continuous improvement on direct/indirect material/UPH cost down & yield enhancement program.
• Ensure robustness of process control to meet yield & through-put expectation.
• Report any non-conformance/customer complaint issue and develop/follow up the improvement actions.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Defines IC package/SMT/SSD drive requirements, goals, and milestones for all SSD product groups and customer requirements.
• Develops SSD assembly and IC packaging material and processes to meet quality, reliability, cost, yield, productivity and manufacturing requirements.
• Develops new package and SMT process qualification programs.
• Prepares and/or updates specifications for piece parts of integrated circuits or semiconductor assemblies.
• Plans and conducts experiments to fully characterize material and processes throughout pathfinding to development to ramp.
• Develops solutions to improve quality, reliability, cost, yield, process stability/capability, productivity, and safety utilizing formal education, experience, statistical knowledge, and problem-solving tools.
• Establishes process control systems. Transfers process to high volume manufacturing and provide support in new factory start-up.
• Acts as a liaison with suppliers/vendors.
• Maintains product quality while developing and introducing package cost reduction programs.
• Coordinates the introduction of new package processes into production.
• Using appropriate tools, performs integrity analysis of packages.

PME Specific Role Description includes the following but not limited to:

• SMT material and process development
• SMT AI/ML integration development
• SMT technology (material/process/metrology/equipment) pathfinding & roadmap
• Stencil design/development for new components
• DFM assessment and NUDD risk management
• Process-Material-Component-board-drive interactions
• DOE & Mechanical and Material Lab Tools & Failure Analysis knowledge
• Quality Tools: FMEA, 8D, DMAIC, IPC knowledge etc.
• Statistical Tools: Statistical analysis (JMP/Minitab), Green Belt/Black Belt certification
• Special engineering characterization & improvement projects
• Factory emergency taskforce support

We are seeking a detail-oriented and analytical Software Engineer to join our team in Petaling Jaya, Malaysia. The primary responsibility of this role is to maintain and develop test scripts for our HDD Validation Team. Given the seasonal nature of test scripting demands, you will also focus on automating and optimizing our testing processes and workflows. This typically includes, but not limited to, web development or Python scripting.

• Develop and debug HDD test scripts (e.g. Java, Ruby).
• Collaborate with test engineers to enable new testing methodologies.
• Troubleshoot and debug issues within test environments, providing timely resolutions.
• Develop features for our internally self-hosted web portal (MERN-stack).
• Help maintain high service availability for our servers and equipment.
• Design and implement automation solutions to optimize the team’s workflow.
• Participate in code reviews and maintain clean, well-documented code.

The lab's function is to provide analysis and test support to the operations team, assist with regular production monitoring, troubleshoot issues as they arise, and develop new testing methods to meet evolving process or technology requirement.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Conduct daily reliability test data analysis and reporting, including failure analysis (FA) for abnormal data
• Study and optimize test criteria based on product design
• Oversee machine/tooling buy-off, standardization, tool maintenance, and spare parts management.
• Tool optimization and new tool preparation to meet new product/technology requirements.
• Collaborate with the worldwide team to ensure consistent testing correlation
• Support other function teams for key projects.
• Manage Tool capacity
• Maintain proper documentation of work processes and procedures
• Communicate timely and effectively with relevant stakeholders
• Coach and guide technicians and operators

The individual will be responsible for fully supporting the Department Manager on the development of the company goals, strategy and tactics. The most important being the ability to work with the team to assure the good execution. The individual will work with the team to fully support the company and department goals.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
• Support Automation and development for new automatic and robotic equipment qualification and sustaining.
• Support the Production Line. Report online machine status and issue to reporting manager
• Follow daily/shiftly line issue and production support for automation equipment.
• Continuous improvement on direct/indirect material cost down, UPH, MTBA, and MTBF enhancement program.
• Ensure automation equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Perform automation equipment conversion and set up. Observe 6S on daily job to ensure the continued and smooth production line.
• Able to conduct trainings to Operator/technicians on machine operation and skill improvement.
• Able to replace spare parts and machine buy off.
• Experience in automation equipment’s
• Manage engineer’s logistic needs.
• Any other duties assigned from time base on schedule and unscheduled activities
• Participate in productivity improvement, Lean, Kaizen and similar activities and provide manufacturing process optimization solution

• Responsible for WB Process Recipe/Process Parameters setup
• Define the process window and recipe baseline by using JMP DOE approach.
• Good in problem solving and work on the Root Cause Analysis/Finding using, 5 whys, DMAIC, 8D approach/methodology
• Work closely with Cross site’s Package development team to understand the Package Design Rules & Requirements
• Ensure smooth transition from Development to new product qualification phase
• Work closely with manufacturing process and equipment team, and cross site process development team
• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shake/pass over of process for New device/product introduction to the production line and new process technology capabilities development.
• Responsible for new material/component first article inspection and final buyoff.
• Continuous improvement on direct/indirect material/UPH cost down & yield enhancement program.
• Ensure robustness of process control to meet yield & through-put expectation.
• Report any non-conformance/customer complaint issue and develop/follow up the improvement actions.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Provide mechanical simulations and solutions for edge-cutting flash memory products.
• Develop inhouse structural simulation automation platform based on commercial softwares (e.g. ANSYS, Abaqus).
• Predict and define structural risks and mechanisms using simulation tools for electronic packaging design, assembly and reliabilities.
• Material characterization for simulation accuracy and efficiency improvement  

• Coordinating SSD mechanical qualification efforts for new products and change in designs, materials, or processes 
• Involve in mechanical reliability test include but not limited to solder joint analysis, environmental test, mechanical stress & solderability
• Providing recommendations on product release based on package reliability test results
• Jointly assess risk associated with excursions, conversions, reliability  ,qualification issues.
• Manage reliability schedule plan to stakeholders and provide progress update in timely manner
• Coordinate with technician to perform daily execution to meet project schedule
• Initiate failure tracker in JIRA and ensure it's properly closed
• Review Mechanical test result and provide recommendation
• Involve in New Product Introduction phase for tester bring up & resource readiness.

The QMS & BCMS Engineer is responsible for developing, implementing, and maintaining Quality Management Systems (QMS) and Business Continuity Management Systems (BCMS) in line with industry standards, regulatory requirements, and organizational objectives. This role ensures compliance with ISO standards, drives continuous improvement initiatives, and collaborates with cross-functional teams to enhance operational resilience and quality assurance.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop, implement, and maintain the Integrated Management System focusing on Quality Management System & Business Continuity Management System in accordance with ISO 9001 & ISO22301 and other applicable quality standards.
• Lead and conduct internal audits to ensure adherence to QMS & BCMS policies and procedures and follow up on corrective actions.
• Facilitate management reviews, coordinate audits with external certification bodies, and ensure readiness for external assessments.
• Monitor and analyze quality performance metrics, providing recommendations for improvement and driving initiatives to reduce non-conformances.
• Design and facilitate business continuity plans (BCP), ensuring that they are effective and kept up to date.
• Plan, coordinate, and conduct business continuity drills and simulations to evaluate the effectiveness of recovery procedures and improve preparedness.
• Conduct Business Impact Analysis (BIA) and risk assessments to identify critical business functions, potential risks, and necessary recovery strategies.
• Liaise with internal stakeholders, such as EHS, IT, facilities, and operations teams, to ensure the integration of business continuity measures into daily operations.
• Monitor and report on the progress of quality and business continuity projects, ensuring alignment with strategic goals.
• Identify opportunities for process improvements, lead root cause analysis, and implement corrective and preventive actions.
• Guide IMS & BCMS Coordinator to ensure the system being implemented and compliance.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Factory Capex planning base on the loading forecast, Capex budget control and monitoring on capital utilization and efficiency.
• Productivity improvement project: Lead in cost saving projects such as Productivity improvement, cycle time improvement, MMR improvement, etc. to meet company goals.
• Capacity planning and analysis to meet the volume demand and maximize the plant utilization.
• Maintain IE database and lead on the IE related system project.
• Time study and time standards: Perform time study data collection and analysis, continuous improvement based on Lean concept.
• Define production layout to ensure high efficiency and ergonomic for Lean operation.
• Coordinate in tool relocation & re-layout activities.
• Resources planning for DL & IDL based on production volume targets.
• Carried out material flow & process flow analysis. Study and explore opportunity to improve current process flow, material flow, line balancing, etc.….
• Validate automation performance and capability.
• Support IE in validating offline process activity such as conversion time, kitting time, tooling preparation time, etc. and opportunity to improve the offline activities cycle time.
• Collaborate with Production, QA, Process, and Automation team to achieve Operations KPI’s
• Perform other duties as assigned.