Total 68 procurement engineer job vacancies in penang

負責任的

• 監控整個 QAQC 部門的運作。
• 透過監控確保品質目標和產品效能始終如一地得到滿足。
• 確保遵守公司的安全規則和規定。
• 管理和改進製造中的品質保證流程。
• 維護測試設備的運作包括設定。
• 參與ISO內部審核團隊，確保管理系統處於良好狀態。
• 處理內部和外部審計並準備詳細報告。
• 制定並維護標準作業程序和記錄的系統方法。
• 應日本客戶的要求。
• 處理並解決客戶的品質相關投訴。
• 與跨職能團隊合作，識別並解決與品質相關的問題。
• 處理管理層分配的任何其他任務。

要求

機械、電氣或工業工程學位

至少2年相關製造公司QC或QA工作經驗

語言：日語N2口語（無需證書）和英語。

津貼和福利

• 津貼（旅費、交通費等）
• 醫療保險
• 個人發展機會

1. Responsible for the procurement activities of the assigned materials which include:
a. Responsible as main interface with more complex customer / product with effective coordination internally in addressing issues.
b. Coordinate material simulation activities to meet customer order fluctuation.
c. Study and take appropriate actions on the MRP reports after the MRP run.
d. Provide input/updates on material delivery related issues.
e. Ensure good material planning and expedite the right materials for smooth production.
f. Update critical parts list daily.
g. Attend daily operation meeting and attend task force calls on critical supply materials.
h. Coordinate activities with relevant parties to avoid line stoppage if the right material cannot arrive on time
i. Track and monitor supplier delivery performance.
2. Constantly review the planning parameters according to business trend.
3. Responsible to support the activities on inventory management to achieve monthly coverage and inventory turns including quick disposition on rejected and obsolete materials, minimize overhanging materials, work on overhanging materials claims etc.
4. Strategic planning to minimize special premium cost (e.g. change of ship mode) to support situation requirement.
5. Work on special freight claims and line-down claims due to delinquent supply from suppliers.
6. Procure new part releases.
7. Determine implementation dates of ECN (Engineering Change Notice) of both materials and software.
8. Prepare report e.g. ABC analysis, inventory report etc. as and when needed.
9. Support activities related to Bosch Production System (BPS), e.g. Supplier Kanban for continuous improvement.
10. Able to share knowledge, guide and lead junior Planners in their daily tasks.
11. Work together and support each other within LOG as well as other department.
12. Support and work towards achieving the departmental goal.
13. Perform any other duties assigned by the immediate superior from time to time.
14. Escalate procurement issues that affect a single Value Stream (Level 1).

Involved in technical and demo support for Omron products and also distributors and channel relationships and partnership collaborations across all levels, while also looking for opportunities to drive further business growth

Key responsibilities:

• Follow-up the latest development of product trend.
• Specialize and build expertise in the assigned product lines.
• Identify customer needs and propose best available product mix or value package.
• Contribute to or participate in product and application seminar with customer.
• Ability to judge the customer application based on the sample given.
• Understand market / customer demand / requirement on product and provide feedback to HQ.
• Develop and share products and technical knowledge which will help solve customer problems.
• Technically competent to support and back up Industry sales team for new applications involving Vision, Smart Sensor, Microscan, PLC, Motion, Sysmac and robot products.
• Conduct off-line and on-line product evaluation / demonstration at customer place.
• Provide system proposal to channel partners and customers.
• Submit weekly report for sample testing results and customer visits.
• To provide internal training (product knowledge sharing) to OMRON’s non-technical support staff, new recruits and channel partners.

• Conduct site visit with follow up proposal and report to installation site and interconnection facilities.
• Possess sound knowledge in both DC & AC electrical system and IT networking with experience in design, install, troubleshoot and re-engineering.
• Prepare bill of material (BOM) for DC, LV, & MV electrical system and manage material purchase to ensure timely and adequate level of inventory until project completion.
• Provide general and technical support throughout the entire tender process.
• Initiate meeting with clients, consultants, authorities, management and cross departments from tender stage until project complete handover.
• Liaise and manage sub-contractors for their scope of works, schedules and monitoring workmanship qualities of subcontractors during installation.
• Record, implement and manage design change requirement through submittal.
• Work with internal and/or external parties such as consulting firms and authorities on licensing and permits matters and documentation.
• Liaise and coordinate with grid operator & authorities on interconnection of MV/HV electrical system to power grid.
• Experience with test & commissioning of the both DC & AC electrical system. Able to troubleshoot and rectify the problem during test & commissioning.
• Review project deliverables at every phase to ensure the project is within timeline and budget.
• Implement best practices and safe work procedure that comply to authorities rules and regulations throughout the project on site.
• Assist to organize a post mortem meeting for evaluation of project results, challenges faced and provide recommendations for future improvement.
• Well verse with technical letter writing, report, presentation, and method of statement documentation.
• To contribute, comply and committed toward the company Quality, Health, Safety and Environmental Management System by making sure it is full compliances to International Standard, Legal compliances, local regulations and any code of practice.

• Degree in Electrical Engineering.
• At least 1 year of experience in electrical industries such as electrical machinery maintenance, electrical product development, factory automation, M&E consultation, application engineering, or MV/HV equipment.
• Basic knowledge of electrical systems.
• Experience with AutoCAD.
• Experience in C&I solar projects is an advantage.
• Willingness to travel to job sites as needed.
• Must have a "car" for work-related travel and site visits.

• *Fresh graduates are encouraged to apply and kickstart their career with us!

• Designs and develops test cases to ensure coverage of internal and external customer expectations by analyzing and understanding system requirements and design specifications; applying standard test case development techniques.
• Reports tests coverage of the assigned test packages by continuously documenting test results during test execution.
• Design & execute test in manual and automated way to verify the product functionality based on requirement.
• Creates & setup the automation test environment consisting of both hardware and/or software by understanding the system configuration.
• Reports defects/failures with clear and concise description into Defect Management System (RTC or similar) by following standard defect description structure.
• Involves in defects resolution together with software developer by providing supporting information as well as retesting resolved bugs on every release.
• Work as individual contributor or technical leader to interface with internal or external customer on testing related topic.

1. To setup complex test systems/ test SW solution with new feature for product line based on PAV provided by MFI team accordingly to the following requirement:
   • Lead the project tester concept study with CoC, SE and ENG
   • To plan and design overall tester as per concept defined
   • To plan project tester budget and procurement activity
   • To track project budget and ensure equipment cost within the planned budget
   • On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
   • Release the test system according to Test system Release Procedure
   • To train and coach maintenance plan, analysis tool of breakdown causes, Test system setup guideline and test fixture and job design concept)
   • To lead standardization activity in functional area
2. To manage procurement plan with involvement of central purchasing, PIR partner and supplier. Maintain supplier performance evaluation and ensure supplier’s deliver according to technical specification.
3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team and achieve defined test coverage, make sure alignment and calibration process (such as flashing if memory, tuner alignment/ Calibration) is in line with test procedure.
4. To guide and coach engineer in technical issue.
5. General support on the following:
   • To lead and drive in TFOR/ FPY meeting to monitor daily operation test related issue.
   • To coordinate change management in process/ test approach
   • To analyze MIS data and coordinate improvement activities on test time reduction and machine
     effiency.
   • Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP
   • To setup new tool to increase setup efficiency
6. Any other TEF7 related duties assigned to.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Provide mechanical simulations and solutions for edge-cutting flash memory products.
• Develop inhouse structural simulation automation platform based on commercial softwares (e.g. ANSYS, Abaqus).
• Predict and define structural risks and mechanisms using simulation tools for electronic packaging design, assembly and reliabilities.
• Material characterization for simulation accuracy and efficiency improvement  

• Responsible for the procurement activities of the assigned materials which include:

          a. Responsible as main interface with more complex customer / product with
              effective coordination internally in addressing issues.
          b. Coordinate material simulation activities to meet customer order fluctuation.
          c. Study and take appropriate actions on the MRP reports after the MRP run.
          d. Provide input/updates on material delivery related issues.
          e. Ensure good material planning and expedite the right materials for smooth
              production.
           f. Update critical parts list daily.
           g. Attend daily operation meeting and attend task force calls on critical supply  
               materials.
           h. Coordinate activities with relevant parties to avoid line stoppage if the right 
               material cannot arrive on time
            i. Track and monitor supplier delivery performance.

• Constantly review the planning parameters according to business trend.
• Responsible to support the activities on inventory management to achieve monthly coverage and inventory turns including quick disposition on rejected and obsolete materials, minimize overhanging materials, work on overhanging materials claims etc.
• Strategic planning to minimize special premium cost (e.g. change of ship mode) to support situation requirement.
• Work on special freight claims and line-down claims due to delinquent supply from suppliers.
• Procure new part releases.
• Determine implementation dates of ECN (Engineering Change Notice) of both materials and software.
• Prepare report e.g. ABC analysis, inventory report etc. as and when needed.
• Support activities related to Bosch Production System (BPS), e.g. Supplier Kanban for continuous improvement.
• Able to share knowledge, guide and lead junior Planners in their daily tasks.
• Work together and support each other within LOG as well as other department.
• Support and work towards achieving the departmental goal.
• Perform any other duties assigned by the immediate superior from time to time.
• Escalate procurement issues that affect a single Value Stream (Level 1).

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• Capacity Enterprise CE / HAMR program development in Penang
• Manufacturing Yield / Defects Improvement projects
• Product improvement iteration qualification

Regular

• Ensure timely translation of new HAMR product/process transfer from US R&D to Penang. Closely work with counterpart in R&D to develop new process / materials for performance improvements.
• Continuous Improvement of Sputter yields / productivity / high PPH for product maturity. Establish all necessary unique process controls for large volume builds based on the learning at NPI stage & HDD requirements.
• Conduct partition studies for troubleshooting root cause of high particle / low yield. Work together with the team members to take appropriate corrective actions for improvements including but not limited to implementing target sandblast criterias, process optimizations, working with target suppliers on quality improvements etc
• Work with Test yield team on Failure Analysis, understanding of various defect mechanisms of HAMR media and their relationship with sputter process / materials etc.
• Optimize sputter machine start-up & operation procedures to ensure process consistency & repeatability. Work with the team on machine start-up time reduction before media characterization activities in order to reduce downtime & improve productivity.
• Work together with Sputter Equipment team on hardware improvement projects for downtime reduction & yield improvements. Ex- sputter magpacks, different type of cathodes, disk holder designs etc.   

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis

Who You'll Work With

We are looking for a self-motivated, and team-oriented Manufacturing Engineer - Debug Focus who takes pride in driving and sustaining product development through manufacturing. As an Arista Software Manufacturing Engineer - Debug Focus, you will engage with Engineering, Platform Design, CM Partners, CA personnel and other business functions. You will get an opportunity to be part of a fast-paced, high caliber team building test software to help validate high-speed digital designs and achieve high yields in manufacturing Arista Network products used in the computer networking industry's largest data centers and AI based applications.

What You'll Do

• Manage and drive quality metrics and improvement activities (yields, bone pile, scrap rates, component fallout).
• Line stops / purges / quality issues leadership.
• Drive product failure debug activities to minimize scrap rate.
• Actively debug product failures.
• Assess manufacturing personnel technical capability.
• Ensure that production site receives the required level of product training.
• Provide hardware debug mentorship to contract manufacturing test engineers and debug technicians. Improve manufacturing operations test processes and actively enhance efficiency, consistency, cost avoidance, and customer satisfaction.
• Address Return Rate (RMA) and customer complaints.
• DRT participation and leadership. Actively work with the Defect Reduction Team to identify product issues and drive resolutions.
• Manage and drive test yield improvements.
• Establish technical direction through the investigation and evaluation of new test technologies.
• Interface/engage with Engineering, Platform Engineering, Manufacturing and CM partners.
• Understand implementation of Change Orders (Agile)
• Manage test infrastructure requirements and ensure factory capacity capability.
• Factory readiness for New Product launches
• Identify and drive process improvement, cycle times reduction and lean activities
• Develop process and/or best practice documentation.
• Establish technical direction through the investigation and evaluation of new test technologies.
• Work in conformance to established manufacturing test processes and procedures.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide post-production and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

BROAD  FUNCTIONS : 

• Coordinate on DET testing and publish results accordingly.
• Ensure all data are uploaded to OLSPC in timely manner
• Guzik tester capacity and resources planning.
• Data analysis
• Competitor analysis and FA.

RESPONSIBILITIES : 

Regular

• Work with Sputter Process and coordinate with technicians on DET testing activities and priorities.
• Monitor DET results closely and advise sputter process for tuning accordingly whenever necessary.
• Resources and tester capacity planning in supporting all DET testing activities.
• Involve in drive build and internal component data analysis and provide valuable opinion to improve internal product performance.
• Propose DET specification to Product & Sputter group based on process capabilities for specs revision during mass production.
• Supervise and coach a group of technicians to perform routine tasks.
• Support all DET testing for internal process evaluation.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules and regulations
• DET lab 7S

Irregular

• Reference generation and head screening for new program.
• Failure analysis for magnetic related issue.
• Product to product comparison.

CONTACTS

Regular

• Sputter Process Engineering, R&D Sputter, PE and QA

 Irregular

• FA, Operation

Electronics
• Understanding of existing platforms, evaluate and select electronics platform for use in power tool applications from a wide variety of technical disciplines.
• Independently develop hardware specification document on the functional requirements of a product.
• Improve existing hardware design based on technical requirements.
• Develop/ improve technical solutions in cooperation with the project team members independently.
• Independently develop and maintain circuit design for different product.
• Independently create and maintain technical documentation.
• Independently perform functional test of test-unit.
• Independently validate and do essential improvements to the electronics to pass Bosch internal qualification.
• Independently prepare essential technical documents for electronics/ tool certification.
• Follow the project schedule according product development process.
• Support line and warranty teams for electronic device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

Motor
• Independently assist / improve technical solutions in cooperation with the project team members.
• Independently assist/ improve with development of designs and processes to improve efficiencies, reduce costs, and improve quality according to project objectives.
• Collaboration of counterpart and provide cost estimates during in development projects.
• Understanding of existing motor platforms, evaluate and select motor platform for use in power tool applications from a wide variety of technical disciplines.
• Independently create and maintain technical documentation.
• Follow the project schedule according product development process.
• Support line and warranty teams for motor device changes and updates.
• Ensure all documents are up-to-date based on engineering change (EC) requests.
• Apply all processes according to valid PT and Bosch procedures published in BGN.
• Apply a manufacturing mind set to designs in order to effectively and efficiently mass produce products while using expertise to elevate the entire team.
• Support and take over special tasks on section and department level as assigned by the superior.

• Responsible to ensure smooth running of Bosch Production System (BPS) activities to be in line with company goals and objectives at the Value Stream area, which covers coordination, planning, implementation, effectiveness and aligned with plant BPS Vision, Mission direction and BPS Road Map deployment.
• Responsible for production line layout as per PGL concept and improvement of the line productivity and working towards improving utilization rate of the machines.
• To ensure correct application of all relevant company guidelines for production and output determination according to PGL/BPS/Lean Concepts
• Able to support workshops for Value Stream Planning (VSP)/System CIP Projects and regular/annual BPS assessment of the maturity level.
• To be responsible for production line layout and improvement of the line productivity of the employees and utilization rate of the machines.
• To be responsible for Root cause analysis and Problem solving in close cooperation with production and manufacturing teams.
• To initiate technical, organizational and changeover improvements and implement them with production associated with an improvement plan.
• To be responsible for Lean manufacturing activities incl. leading continuous improvement projects, moderate/support workshops.
• To execute any other related duties assigned by immediate supervisor from time to time with compliance related company, central and legal requirements.

Job Overview

Setup of local SO-LCL-team as key pillar in enabling more efficient future growth for SO as well as increased independence from market for (SC) talents in Rt. Goal responsibility for these positions will be with ME/PRM1-SO.

• Generate templates and reports with data analysis tools (e.g. DAST/Spotfire/Tableau)
• Test data analysis using IT tools and statical methods
• Generate KPI reports and track KPIs
• Perform test data analysis with IT tools and statistical methods to benchmark test sites or investigate performance of new manufacturing sites.
• Coordinate Bosch internal change management, generate and track engineering change requests for semiconductor products
• Set up of product master data for new products within our international production network
• Support go-life of our global product data base
• Key user for data analysis and traceability tools (e.g. DAST/E2OPEN)
• Requalification of automotive ASICs
• Candidate is responsible for automotive IC's (integrated circuits) in our international production network
• Candidate is responsible to manage product data in series production and coordinate product issues at multiple manufacturing locations around the globe.
• The monitoring of quality and costs of the products is under the candidate's responsibility.
• Planning, controlling and supervising product data projects is also part of candidate's responsibility
• The candidate is required to coordinate manufacturing data of IC products in an international production network in cooperation with the development and manufacturing departments