• Lead the Operations & Maintenance (O&M) aspects of the Interconnection Facility (IF) for Utility-Scale Solar projects.
• Design and implement an effective maintenance plan on medium and high voltage systems as well as related power quality/telecontrol/telemetering/ICT system.
• Present O&M perspective in reviewing relay protection scheme and control design during construction and operation phase.
• Serve as an expert on transmission-related market design and regulatory issues, monitor key developments, and provide recommendations in these areas.
• Setup and lead a technical team consist of engineer and chargeman to respond to electrical breakdown at Interconnection Facility (IF) while ensuring compliance on Service Level Agreement.
• Communicate effectively with authorities, engineering consultants, competent persons, contractors, vendors and clients during projects phase and service warranty period.
• Develop maintenance procedures related to 6.6kV up to 132kV equipment while ensuring compliance with Health, Safety, and Environment legislation.
• Review project technical information and installation quality prior to Defect Liability Period and service warranty.
• Verify all the maintenance outcomes performed by technicians and contractors. Ensure that the countermeasures applied are in accordance with the standards, procedures and specifications allowed.
• Gather information on design failure, installations quality, or materials quality issue, and provide constructive feedback to Project Management team for future improvements.

• Possess at least 7 years of working experience in the development or operation of Interconnection Facility (IF) up to 132kV.
• Possess a Bachelor's Degree in Electrical Engineering or equivalent, or
• Certified competent person by Suruhanjaya Tenaga in 33kV or 132kV discipline.
• Expert in protection co-ordination studies and configuration of major relay brands approved for by TNB for Utility-Scale Solar Interconnection Facility.
• Experience with commissioning SAT/FAT activities including secondary injection test.
• Experience in secondary and primary designs of medium and high voltage equipment, including protection, metering, automation, power quality, and ICT.
• Excellent analytical, problem solving and decision-making skills.
• Customer oriented, independent, and good interpersonal skills.
• Good in communication, and excellent verbal and written in Bahasa Malaysia and English.
• Able to work on weekend and public holiday if required.
• Possess valid driving license D, and able to travel to remote areas.

The Maintenance Head is responsible for overseeing all maintenance activities to ensure optimal operation of machinery, equipment, and facilities within a semi-fabrication/metal parts manufacturing environment. This role involves managing a team, ensuring compliance with safety standards, and driving preventive and corrective maintenance programs to minimize downtime and enhance productivity.

Key Responsibilities:

• Plan, schedule, and execute preventive and corrective maintenance for all equipment and facilities.
• Lead and manage the maintenance team, ensuring proper training and skill development.
• Troubleshoot and resolve mechanical, electrical, and operational issues promptly.
• Monitor and maintain inventory of spare parts and maintenance supplies.
• Collaborate with production and quality teams to ensure smooth operations and minimal disruption.
• Ensure compliance with health, safety, and environmental regulations.
• Identify and implement process improvements to enhance equipment efficiency and reliability.

Job Requirement:

• Candidate should possess a Professional Certificates, Bachelor Degree, Diploma / Advanced Diploma or equivalent in Engineering (Electrical / Electronic),Engineering (Mechatronic / Electromechanical),Engineering (Mechanical)
• Preferably at least 4 years of related working experience.
• Preferably specializing in Maintenance / Repair or equivalent.
• Good communication skills in English, Malay, Mandarin language for both spoken and written
• 1 positions available

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform basic level analysis for production hold lots and give disposition and feedback to related team such as Product Engineer, Test Process Engineer, Assembly Process Engineer, and Test Equipment Engineer for issue investigation.
• Execute 1st level troubleshooting during test and escalate it to related team.
• Handle test engineering activity such as DOE/Volume checkout/correlation etc.
• Maintain 6S in common of lab, in charge of units control in lab.
• Provide support for hardware release such as product correlation and machine buy-off activities qualifications.
• Attend to immediate product/system related testing issues and demonstrates open communication policy and involvement with production and maintenance people on achieving problem solution.
• Perform 1st level EFA and 2nd level EFA for production hold lots and give disposition, and feedback to related team for issue investigation.
• Support related production issue related to TPE (flush out)
• Wafer test process

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform basic level analysis for production hold lots and give disposition and feedback to related team such as Product Engineer, Test Process Engineer, Assembly Process Engineer and Test Equipment Engineer for issue investigation
• Execute 1st level troubleshooting during test and escalate it to related team.
• Handle test engineering activity such as DOE/Volume checkout/correlation and etc.
• Maintain 6S in common of lab, in charge of units control in lab.
• Provide support for hardware release such as product correlation and machine buy-off activities qualifications.
• Attend to immediate product/system related testing issues and demonstrates open communication policy and involvement with production and maintenance people on achieving problem solution.
• Perform 1st level EFA and 2nd level EFA for production hold lots and give disposition, and feedback to related team for issue investigation;
• Support related production issue related to TPE(flushout).

Job Description

As Manufacturing Process Engineering Technician, you will be responsible for maintaining specific tools on a manufacturing production or NPI line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively. You will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet.
Communicates with engineers and technical specialist regarding sputter metrology tools measurement results and calibration procedure. Able to revise any documents changes regarding sputter metrology
tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Troubleshoot and resolve sputter instrumentation issues
• Maintain and update sputter instrument documentation including standard work procedures, process specifications, etc
• Facilitate small process improvement projects through collection and analyzing data and monitoring engineering trials
• Entering and compiling data relating to metrology measurement
• Training in the functions of the new project launches
• Other duties as assigned

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible to supervise Production lines
• Provide clear, regular communication of production priorities, challenges, and status across the shift to meet production schedules, goals and objectives
• Directly manage Operators team, routinely provide guidance on career development in your team and regularly conducting performance management. engagement activities and monitor attendance
• Responsible for labor planning and allocation between processes, 6S, line cleanliness, tardiness and training
• Collaborate with Engineering/Supporting Team to solve day to day excursion, implement line process changes or new implementations for improvements
• Periodically audit production adherence to visual aids and standard instructions

Responsible and capable in troubleshooting and repairing automation equipment (ARV, ARS and MMS) and ensuring this equipment are in good condition to support production capacity.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for improving and sustaining the automation equipment capability and meet the KPI (Availability, OEE, MTBA and MTBF)
• Performing and line troubleshooting and supporting daily production operation.
• Analyze equipment failure root causes and propose corrective actions.
• Ability to identify root cause and provide corrective action through use of Effective problem solving tools.
• Perform regular inspections to identify equipment root cause.
• Perform Preventive Maintenance and calibration the equipment to optimal condition.
• Maintain equipment maintenance documentation and checklist.
• Propose improvements to enhance equipment performance and reliability.
• Support equipment setup and relocation
• Assist Engineer in continuous Equipment improvement projects and Automation projects
• Demonstrate a high degree of initiative, motivation, and willingness to work proactively either independently or within the team. 
• To meet MTBA, UPH and down time
• To sustain and maintain 6S and PM activities  
• Quality issue investigation & CA monitoring 
• Ensure and manage all the automation components good condition to support production.

The Chargeman (B0) is responsible for ensuring the safe and efficient operations, maintenance, repair of high voltage electrical systems and equipment within the DPP plant. The job incumbent requires to comply with the Energy Commission of Malaysia (Suruhanjaya Tenaga Malaysia) safety regulations and standards, to minimize equipment downtime and maintaining optimal plant performance.

1. Operations & Maintenance

• Oversee the operation, maintenance and troubleshooting of high voltage electrical systems, including transformers, switchgear and distribution networks.
• Conduct regular inspections and preventive maintenance to ensure the reliability and safety of electrical systems and installations.
• Perform necessary repair and maintenance of electrical components / systems as required.

2. Compliance & Safety

• Ensure compliance with the local “Suruhanjaya Tenaga Malaysia” (Energy Commission of Malaysia) safety regulations, codes and standards.
• Implement and adhere to safety protocols and procedures to prevent accidents and injuries.
• Conduct risk assessments and hazard analyses for electrical systems and equipment.

3. Technical Support

• Provide technical support and guidance to the maintenance team on high voltage electrical issues.
• Assist in the planning and execution of electrical projects, upgrades and modifications,
• Liaise with external contractors and suppliers for specialized services and parts.

4. Documentations & Reporting

• Maintain accurate records of maintenance activities, inspections and repairs.
• Prepare and submit reports on electrical systems performance, issues and resolutions.
• Ensure proper documentation of all electrical installations and modifications

5. Emergency Response 

• Respond promptly to electrical emergencies and power outages to minimize downtime.
• Implement corrective actions and restore power supply safely and efficiently,

6. Perform any work or responsibility assigned by the Management as and when necessary.

Evaluation of yeast and ingredients performance profiles on selected bread applications.

Key responsibility and Activities:

• Revenue Management
  • Identification of representative applications with Quality/ technical services / commercial
  • Development of procedures for good repeatability / reproducibility
  • Plan and conduct daily and weekly tests
  • Formalization of test protocols
  • Updating recipes / process to maximize the relevance and representativeness of the selected tests.
• Organization of sample collection
  • Participation in the definition of collection / preparation of market samples and tests samples
  • Sample identification and records.
• Supply and purchase of raw materials required (flour, fat ….)
  • Test Bread
  • Selection and maintenance of equipment to operate the tests
  • Selection of reference revenue by origin / destination of the sample / parameters to assess
  • Preparation of raw materials
• Recording and exploitation of results
  • Prepare baking test reports
  • Entering data in the database
  • Annotation, and dissemination of results to interested
  • Exploitation / extraction on demand
• Training and experience sharing
  • staff training to highlight the impact of these tests (other services)
  • Train Testing Technician of baking from other subsidiaries
  • Experience sharing

Job Requirement:

• Candidate should possess a Professional Certificates, Diploma / Advanced Diploma or equivalent in Engineering (Metal Fabrication / Tool & Die / Welding)
• Preferably at least 2 years of related working experience.
• Preferably Non-Executive specializing in Manufacturing / Production or equivalent.
• Good communication skills in English,Malay,Mandarin language for both spoken and written
• 4 Other positions available

Key Responsibilities:

Component Assembly: Precisely assemble metal parts and semi-finished products following technical drawings, work instructions, and specifications.

Buffing & Finishing: Operate buffing machines and other finishing tools to smooth, polish, and prepare components for final use.

Quality Control: Inspect assembled parts and finished components for defects, alignment, and adherence to quality standards. Perform necessary adjustments as required.

Equipment Operation & Maintenance: Operate, calibrate, and maintain assembly and buffing equipment to ensure optimal performance. Report equipment malfunctions to the maintenance team promptly.

Documentation: Maintain accurate records of production activities, inspections, and material usage.

Process Improvement: Identify areas for process improvements and contribute to increasing efficiency and reducing waste.

Safety & Compliance: Follow all workplace safety guidelines and company policies. Maintain a clean and organized workspace.

• Create a comfortable atmosphere and a good working environment by setting a good example with simple, straight forward behaviour.
• Be clear in communicating to contractors and vendors, ensure their works are in compliance with their PPM, in house rules, safety measures, and emergency procedures
• Listen to and work towards completing goals, work assignments in a timely manner, update and feedback on plans and results and ensure that you understand the overall strategy.
• Support your co-workers and be a good listener. Promote your own or your co-workers' special abilities and allow your manager the opportunity to develop and support your own initiatives.
• Work towards department goals and the goals of IKEA
•Ensure all works minimise disruption, risk and inconvenience to co-workers, visitors and customers

As a growing electronics company, we're in search of a candidate who can demonstrate their expertise in establishing a solid foundation for our service team, particularly in the areas of ACMV installation & service. This role also involves serving as the go-to technical resource for our customer service team, aiding them in delivering top-notch troubleshooting solutions for our customers to ensure a seamless and speedy resolution.

This individual will serve as the cornerstone of technical hands-on knowledge for PRISM+ aircon products. They will be responsible for offering technical assistance, guidance, and support to both individual consumers and businesses encountering issues with our technical, hardware, and software systems. The selected candidate will play a pivotal role within PRISM+ Malaysia and will report directly to the Aircon Operations & Technical Manager.

Responsibilities of Aircon / ACMV Technician but are not limited to:

• Installs, inspects, maintains, and repair various types and brand of all types of commercial and residential air conditioners.
• Performs regular preventive maintenance and corrective works on air conditioning systems.
• Diagnoses electrical and mechanical defects and malfunctions.
• Carries our repair works such as replacement of air con compressors, fan coil motors, etc.
• Recommends appropriate repair and improvement works to customers.
• Perform servicing of air conditioning at customers' residential and commercial premises that includes chemical washes, chemical overhauls, general maintenance services.
• Ensure all works compliance with appliance standards and Health and Safety Act.
• Daily reporting and weekly reporting to direct manager.
• Any other tasks, when required by the immediate supervisor.

• Hands-on experience in installation, maintenance (including chemical washing), troubleshooting and repairing of air conditioners.
• Must be able to handle physical work due to job nature.
• Basic command of English, Malay spoken and written.
• Responsible for providing air conditioning (air conditioning system) services, such as inspection, maintenance, installation, air conditioning failure.
• Provide monthly maintenance and operation services to customers.
• Effective handling of fault/emergency repairs and customer complaints.
• GDL driving license.
• Minimum 1 year experience is required.
• 5.5 days' work week (Monday to Friday 9am to 6:30pm / Saturday 9am to 1pm).
• Preferably with a certification BCA License (Air-Con License) - INSTALLATION OF STRUCTURAL SUPPORTS FOR AIR-CON UNITS or equivalent/Malaysian Special Skills Certification (Preferred).

• Equipment Maintenance: Conducted regular inspections, preventive maintenance, and repairs on various power tools and manufacturing equipment to minimize downtime and ensure optimal performance
• Troubleshooting: Diagnosed and resolved equipment malfunctions and breakdowns promptly, utilizing technical expertise in power tools and machinery.
• Safety Compliance: Ensured compliance with safety regulations and guidelines, including lockout/tagout procedures and personal protective equipment (PPE) usage, to create a safe working environment.
• Facility Repairs: Conducted repairs and maintenance tasks on building systems, such as electrical systems, UPS, Door Access, CCTV, etc to ensure a comfortable and safe working environment for employees.
• Inventory Management: Managed and maintained an organized inventory of spare parts and supplies for power tools and facility maintenance, optimizing cost-effectiveness.
• Vendor Relations: Collaborated with external vendors and contractors to schedule and oversee maintenance and repair projects, ensuring timely and cost-effective services.
• Emergency Response: Acted swiftly during emergency situations, such as power outages or equipment failures, to minimize disruptions and maintain production efficiency.
• Documentation: Maintained detailed records of maintenance activities, equipment specifications, and service history to support decision-making processes and regulatory compliance.
• Continuous Improvement: Identified opportunities for process improvements and cost savings in facility management and maintenance, actively participating in improvement initiatives.
• To assist engineer and participate as teams for utility bill management, energy consumption
  tracking, work permit, contractor orientation, etc.

Scope of Responsibilities

1. To ensure the satisfactory operation of all the specialized/TCS equipment and installations at all times.

2. To ensure services delivery are meeting the maintenance standard and requirement such as LLM APST, SIRIM ISO and Internal Audit:

• In-charge of maintenance and improvement works for Toll Collection System
• Timeliness in completing assigned tasks
• To supervise and monitor the Preventive and Corrective Maintenance and Enhancement works carried out by contractors / junior staff

3. To ensure compliance with regulations, related to the Environmental Quality Act, Safety and Health Act, and management system standards, while ensuring that the QESH achieves its intended results by incorporating

• a process approach, risk-based thinking, and implementing improvements to enhance performance.

Key Tasks

1.  To carry out Preventive and Corrective maintenance works.
2. To carry out 1st level of maintenance works.
3. To prepare maintenance report on any malfunctions / defects affecting equipment.
4. To repair electronic equipment / machines.
5. To inspect all the specialised / TCS equipment.
6. To be part of the Emergency Response Team and attend to emergency situation when instructed.
7. To monitor and supervise works undertaken by maintenance contractor / junior staff.
8. To monitor and supervise interfacing works undertaken by other party which are related to the system or equipment installed.
9. To provide assistance and technical advice to other team members / maintenance contractor.
10. To perform standby duties and response promptly in the event of any equipment or system failure / malfunction in meeting the Emergency Call Back standard.
11. To attend, rectify and update status of defect or request raised in the e-Work System.
12. To attend, check and update status of the defect raised i.e. NOD / NCR in the Expressway Performance Indicator System (EPI) of LLM.
13. To prepare Requisition Form (RF) in e-PO System in obtaining management approval for the Purchase Order (PO) issuance to maintenance contractors.
14. To assist TCS section for yearly budgeting for maintenance and improvement budget i.e. minor repair, enhancement, consumable and capex.
15. To exercise safety at site for own and ensure safety procedure is implemented by contractor at work as per OSHA requirements.
16. To undertake any job assignment / improvement / planning work related to TCS and meet the needs or requirements of the company business.
17. To undertake other duties as directed by the Head of Group Mechanical, Electrical and Instrumentation.

Job Requirement:

• Diploma or Certificate in Electronic Engineering from Local University / Technical Institution or equivalent.
• Minimum 2 years experience in repair and maintenance of electronic equipment
• Well verse with Toll Collection System maintenance.
• Good communication skills in Malay, English language for both spoken and written
• Ability to work under pressure, independent and possess analytical and logical thinking.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Accomplish scheduled daily preventive maintenance of tools inside cleanroom environment.
• Perform simple troubleshooting and repair activities of tools with breakdown following guidance from maintenance head.
• Ensure machine maintenance check sheets are filled out in a timely manner.
• Execute cost reduction initiatives spearheaded by engineers.
• Perform other duties as assigned by immediate superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform basic level analysis for production hold lots and give disposition and feedback to related team such as Product Engineer, Test Process Engineer, Assembly Process Engineer and Test Equipment Engineer for issue investigation
• Execute 1st level troubleshooting during test and escalate it to related team.
• Handle test engineering activity such as DOE/Volume checkout/correlation and etc.
• Maintain 6S in common of lab, in charge of units control in lab.
• Provide support for hardware release such as product correlation and machine buy-off activities qualifications.
• Attend to immediate product/system related testing issues and demonstrates open communication policy and involvement with production and maintenance people on achieving problem solution.
• Perform 1st level EFA and 2nd level EFA for production hold lots and give disposition, and feedback to related team for issue investigation;
• Support related production issue related to TPE(flushout).

As a technician in the R&D department, you will undertake several important responsibilities. This position requires strong organizational, communication, and data analysis skills, as well as the ability to handle multiple tasks flexibly to support the smooth progress of the R&D team. The specific job duties include:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for the daily management and inventory of laboratory materials, ensuring timely supply, reasonable inventory allocation, material disposal, and other related tasks, to ensure the smooth progress of experiments.
• Organize and arrange relevant experiments for engineering materials according to project requirements, ensuring the standardization of experiments and the accuracy of data.
• Responsible for FA work, assisting in analyzing the root causes of product failures.
• Use MES (Manufacturing Execution System) to establish and manage engineering materials, ensuring accurate records of material flow and usage data throughout the production and R&D processes.
• Conduct measurements and record related physical quantities such as three-point bending and warpage, ensuring the accuracy of test data to provide reliable basis for subsequent analysis and decision-making.
• Collect engineering test material data according to the requirements of engineers.

Job Responsibilities:

• Operate and maintain all equipment and do PPM as per monthly schedule.

• All decoration or beautification for any event.

• Rectification and Repair of breakdown of Services and Equipment.

• Upgrade and improve maintenance efficiency and cost effectiveness.

• Assist in the Marketing Events set-up, on-going and dismantling of sound system, lightings etc

• Monitoring and assist the activities of monthly service contractor.

• Liaise with related authorities for any malfunction of equipment with regards to the safety of building occupants.

• Part of the ERT (Emergency Respond Team) committee.

• Preparation and submission of monthly reports.

• Routine maintenance & servicing activities including but not limited to monthly service for Cooling tower, AHU & FCU & Split Unit.

• Any adhoc activities as per request.

Job Requirements:

• Candidate must possess at least 2-3 year(s) of working experience in shopping mall building is required for this position.

• Applicants must be willing to work at M3 Mall, Jalan Madrasah, Taman Melati, Kuala Lumpur.

• Preferably Junior Officer specializing in Building Operations and maintenance and knowledge on Air conditioning system (Chiller, Cooling Tower, AHU, FCU & Split Unit) is an advantage.

• Strong technical knowledge and hands-on to resolve problems.

• Responsible and able to work independently.

• Ability to work in shifts and extended hours.

• Full-Time position(s) available.

Job Requirement:

• Candidate should possess a Primary / Secondary School, Professional Certificates or equivalent in Engineering (Metal Fabrication / Tool & Die / Welding)
• Preferably at least 2 years of related working experience.
• Preferably Non-Executive specializing in Manufacturing / Production or equivalent.
• Good communication skills in English,Malay language for both spoken and written
• 2 Full-Time positions available

Job Scope and Responsibilities

Maintenance Management

1. Organize routine service schedules to ensure machinery, equipment, and infrastructure are maintained efficiently.
2. Allocate tasks to contractors or liaise with internal client departments and teams for effective task execution.
3. Check, calibrate, and repair instruments to maintain operational accuracy.
4. Replace or fit new parts for equipment, plant, and buildings.
5. Respond promptly to equipment breakdowns, resolving issues or arranging for replacements to minimize downtime.
6. Conduct scheduled checks on machinery and parts, ensuring they are in optimal condition.
7. Overhaul and replace components in line with maintenance schedules.
8. Control maintenance tools, equipment, and stores to ensure readiness and functionality.
9. Monitor and manage maintenance costs to stay within budget.
10. Develop, monitor, and implement preventive maintenance programs.
11. Perform daily maintenance tasks, including electrical, plumbing, and general repairs.
12. Coordinate and execute mechanical and electrical improvement projects for production, warehouse, plant, and building facilities.
13. Perform in-house maintenance work to reduce downtime while awaiting contractor support.

Safety and Compliance

1. Serve as the Becker Loss Prevention Coordinator, ensuring compliance and auditing according to Becker Loss Prevention Standards.
2. Act as a secretary for the safety committee and manage all documentation and coordination required by DOSH.
3. Oversee the renewal of licenses for equipment such as goods lifts and air compressors.
4. Ensure compliance with Lembaga Elektrik Negara regulations concerning electricity supply.

Environmental Compliance (DOE)

1. Maintain and update waste inventory records, including scheduled waste management in compliance with DOE requirements.
2. Coordinate with external consultants for LEV system and dust collector monitoring and submit reports to DOE as needed.
3. Ensure certification in environmental professional practices, particularly for managing scheduled waste and dust collectors.

Sustainability and Reporting

1. Compile and report on the Becker Sustainability Program, including EKPI and climate reports.

Facilities Management

1. Ensure the maintenance and efficient operation of all company facilities, including office spaces, plant areas, and buildings.
2. Oversee the issuance and maintenance of employee safety equipment, including boots and uniforms, ensuring compliance with safety standards.
3. Manage locker allocation and upkeep for employees.
4. Liaise with external vendors for maintenance and facilities-related services, ensuring timely and high-quality work.

Emergency and Ad-hoc Coordination

1. Coordinate annual and ad-hoc inspections by local authorities (e.g., Bomba, MBSA, Health Department, Customs).
2. Respond to emergency situations promptly to mitigate safety and operational risks.

Administrative Support and Documentation

1. Maintain accurate records of maintenance activities, inventory, and facilities usage.
2. Prepare reports, schedule maintenance activities, and provide administrative support to the maintenance team.

Dispenser Technician for, Technical Services

To do new installation, maintenance services and Calibration for our new customers
and existing customers.

MU 3IN1

Laboratory & Incoming

• Supervise and ensure the quality of finished product is maintained.

Laboratory & Incoming

• Supervise, monitor and assure quality of incoming raw materials, in-process product & end product in accordance to product specifications & customer requirements.

• Assist to co-ordinate new product developments with R&D in terms of formulation of products.  
• Documentations, involved verifying Quality Control Record.
• Supervise and ensure in issues related to safety and quality.
• Assist to co-ordinate & oversee quality checking activities inclusive of food safety.
• To assist Quality inspectors, Checkers to carry out quality inspection.
• Housekeeping of the lab.
• To perform any other duties that may be assigned from time to time by Management.

Quality Check & Outgoing

• Inspect and record timely of all results in quality records.
• Responsible for line inspection to ensure production operation and process are in accordance with the required standard.
• Highlights non-conformance of production operation, semi process and finish products promptly to related personnel for immediate corrective actions.
• To control process deviation and eliminate the cause of quality products thus reducing unnecessary wastage.
• To carry out hygiene inspection and highlight any inadequacies.
• Carry out lab testing from incoming of raw material to finish products.

• Responsible for all electrical systems in the solar PV plant to ensure compliance with regulations and enhance system health.
• Conduct routine inspections and maintenance on solar PV systems, including DC and LV components and connections.
• Attend to electrical breakdowns related to solar PV systems, initiating fault diagnosis and corrective actions.
• Establish and maintain proper documentation and records through the provided channels for all corrective and preventive maintenance.
• Supervise and monitor any work related to the solar PV system performed by appointed contractors.
• Provide inspection reports, preventive maintenance reports, and any product warranty claim reports, including for inverters, PV modules, data loggers, etc.
• Provide monthly, quarterly, and annual operating reports detailing information about electricity production, efficiency, availability, maintenance performed, outages, inspection results, manufacturer-recommended services, replacements, control settings, and adjustments of equipment and protective devices.
• Liaise with government authorities such as the Energy Commission (ST), Tenaga Nasional Berhad (TNB), and Visiting Electrical Consultants on all solar PV system-related issues.
• Responsible for submitting the Plant Performance Report to the Energy Commission (OAS System) on a monthly basis.
• Manage, maintain, and sustain the spare parts and tools inventory.
• Support and assist the project execution team during the installation phase of the solar PV system.
• Support and participate in other O&M-related work for Residential, Commercial & Industrial, and Large-Scale Solar projects as directed by the Engineer.

• Possess 1 year of working experience in an environment involving the operation and control of low-voltage electrical equipment.
• Possess sufficient knowledge and skills in wiring for LV installations.
• Extensive knowledge of electrical theory and troubleshooting skills.
• Excellent analytical, problem-solving, and reporting skills.
• Possess sufficient knowledge of the Electricity Supply Act 1990 and its regulations.
• Possess a valid A0/A1/PW2/PW4 certificate from the Energy Commission (ST).
• Certification as an Electrical Supervisor by the Energy Commission (ST) is an added advantage.
• Proficient in computer literacy.
• Customer-oriented, independent, and possess good interpersonal skills.
• Possess a valid D and GDL driving license and be willing to be based in Penang.
• Good communication skills in both Bahasa Malaysia and English (verbally and in writing).
• Physically and mentally strong and fit.
• Comfortable working on weekends and public holidays if required.
• Fresh graduates are encouraged to apply.

Scope of Responsibilities

1. To ensure the satisfactory operation of all the specialized/TCS equipment and installations at all times.

2. To ensure services delivery are meeting the maintenance standard and requirement such as LLM APST, SIRIM ISO and Internal Audit:

• In-charge of maintenance and improvement works for Toll Collection System
• Timeliness in completing assigned tasks
• To supervise and monitor the Preventive and Corrective Maintenance and Enhancement works carried out by contractors / junior staff

3. To ensure compliance with regulations, related to the Environmental Quality Act, Safety and Health Act, and management system standards, while ensuring that the QESH achieves its intended results by incorporating

• a process approach, risk-based thinking, and implementing improvements to enhance performance.

1. Key Tasks
2.  To carry out Preventive and Corrective maintenance works.
3. To carry out 1^st level of maintenance works.
4. To prepare maintenance report on any malfunctions / defects affecting equipment.
5. To repair electronic equipment / machines.
6. To inspect all the specialised / TCS equipment.
7. To be part of the Emergency Response Team and attend to emergency situation when instructed.
8. To monitor and supervise works undertaken by maintenance contractor / junior staff.
9. To monitor and supervise interfacing works undertaken by other party which are related to the system or equipment installed.
10. To provide assistance and technical advice to other team members / maintenance contractor.
11. To perform standby duties and response promptly in the event of any equipment or system failure / malfunction in meeting the Emergency Call Back standard.
12. To attend, rectify and update status of defect or request raised in the e-Work System.
13. To attend, check and update status of the defect raised i.e. NOD / NCR in the Expressway Performance Indicator System (EPI) of LLM.
14. To prepare Requisition Form (RF) in e-PO System in obtaining management approval for the Purchase Order (PO) issuance to maintenance contractors.
15. To assist TCS section for yearly budgeting for maintenance and improvement budget i.e. minor repair, enhancement, consumable and capex.
16. To exercise safety at site for own and ensure safety procedure is implemented by contractor at work as per OSHA requirements.
17. To undertake any job assignment / improvement / planning work related to TCS and meet the needs or requirements of the company business.
18. To undertake other duties as directed by the Head of Group Mechanical, Electrical and Instrumentation.

Job Requirement:

• Diploma or Certificate in Electronic Engineering from Local University / Technical Institution or equivalent.
• Minimum 2 years experience in repair and maintenance of electronic equipment
• Well verse with Toll Collection System maintenance.
• Good communication skills in Malay,English language for both spoken and written
• Ability to work under pressure, independent and possess analytical and logical thinking.

• Perform daily plating equipment checklist to ensure all operating at its optimum efficiency.
• Execute & perform daily maintenance work as assigned by supervisor.  
• Escalate to supervisor if there are any abnormalities in equipment in operating parameter.
• Proactive in daily preventive maintenance & corrective maintenance and complete all task as per schedule.
• Record down daily preventive maintenance activities in online Digital PM.
• Ensure to follow best practice safety and quality in daily job activity.
• Spare parts management system.
• Coordinates vendor about new project.
• Internal and external equipment calibration.
• New design and improvement equipment control system.
• On call support