Total 9 Full-time Quality Assurance / Control job vacancies in johor bahru johor

1. Monitoring Operation Activity - After approving the production processes by confirming specifications and conducting visual and measurement tests, quality control engineers monitor the operations to ensure they meet the approved systems, communicating any required changes to the production supervisor.
2. Inspecting Procedures - Quality control engineers inspect, test, or measure materials using gauges, calipers, and micrometers, as well as operating electronic inspection equipment to ensure that all necessary procedures and products are inspected to a high standard.
3. Maintaining record of testing - As part of their daily tasks, quality control inspectors maintain detailed records of the testing that's been carried out, as well as relevant additional information, and various metrics such as the number of defective products produced each day.
4. Maintaining Compliance - Quality control inspectors monitor production areas and check that all manufactured products or parts meet the necessary production standards. To Involve with Preventive action, Corrective action activity. 
5. Drawing /Rolling Dies control activity to help improve and maintain good products produce and get good BDV in HPAM process.
6. Quality control engineer check the quality of incoming and outgoing materials or products for a company, as well as the production procedures. This job involves tasks such as running tests, keeping a record of defects, analyzing products, and overseeing procedures
7. Calibration equipment’s – Involve in all instruments calibration activity.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance

About our client: Our client is a general contractor that provides a full range of services in engineering, procurement, construction, and maintenance services to the Refineries, Power, and Petrochemical companies.

About the role:

• Attend the DCS FAT, identify discrepancies and request vendor to make all corrections prior to shipping to minimise site corrective action.
• Coordinate with DCS vendor initial checks and inspections after handover to commissioning to ensure the DCS and associated network cabling, remote I/O panels, CCR monitors and printers etc. are properly installed prior to power up and control software download.
• Coordinate and monitor the DCS initial power up and SAT with the vendor.
• Manage the DCS loop shooting, and function checks correcting logic, graphics, alarm legends as necessary.
• Maintain ‘Logic Forcing Log’ during the commissioning phase.
• Identify and troubleshoot any issues or malfunctions that arise during the commissioning process. Notify vendor for corrective action, parts or site technical support.
• Maintain hardware and software for distributed control system.
• Configuring distributed control system logic to achieve process control in line with the system control philosophy.
• Verify mapping between other vendor PLC / Controls systems such as Gas Turbine / Steam Turbine controls systems.
• Complete pre-commissioning documentation, including dry loop and wet loop test records.
• Supervising and coordinate contractors performing work on DCS post system handover to commissioning.
• Read & understand the project specification with regards to the DCS and ensure installation complies with the technical specification and report any errors to the Project Engineer.
• Participate in commissioning meetings and provide regular progress updates to the Commissioning Manager.
• Shall participate in system completion walkdown of all systems prior to handover from Construction to the Commissioning department.
• Support and provide all necessary Data and DCS trends during Plant Performance testing.

About you:

• 5-10 years of experience.
• Bachelor of Science degree in an appropriate engineering or sciences discipline from a four-year accredited college or university.
• Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position.
• In depth knowledge of Distributed Control Systems.
• Ability to read and interpret DCS logic diagrams.
• Knowledge of electrical, mechanical, and instrument systems.
• Proficient in troubleshooting and problem-solving techniques.
• Knowledge of safety guidelines and regulations.
• Able to speak, read and write in English.
• Strong organizational skills.
• Ability to work independently and as part of a team.
• Excellent communication skills.
• High attention to detail.
• Ability to work in a fast-paced environment.

Other info:

• 1 year contract (renewable)
• Work location: Jurong Island
• Work Hours: 5.5 days

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License No: 94C3545

EAP Name: Kimberly Wong Pik Kiun

EAP Reg. No: R1984508

Job Description

• Follow up with customers on all documentation required for payment
• Ensure billings to customers are done prompty
• Liaising with customers on all enquires relating to billing, reports, collection.
• Follow up with opertion department on relevant documentation required for report submission
• Generating reports on weekly basis on the progression of collections and progression of reports submitted by operation department
• Support the Finance Department
• Any other adhoc duties & responsibilites as assigned by supervisor

Job Requirement

• Min diploma & above in Finance/Accountancy
• Fesh graduates are welcome
• Required skills: MS OFfice, MS Excel, Pivot Table, Vlookup.

PURPOSE OF JOB

Supporting WEO Mechanical business, the ideal candidate shall be equipped with precision machining manufacturing experience.

The individual will work closely with WEO manufacturing sites to ensure product quality is sustained throughout the manufacturing lifecycle of the product. You will facilitate the assessment, identification, correction, and prevention of quality issues via risk analysis and root cause analysis tools.

Reporting to the department head, you will assist in the planning and execution of the corporate quality strategy and tactical action plans rollout. You will be responsible for quality planning and establishing and maintaining metrics to improve quality system processes, process capability, reliability, and quality of the products.

JOB DUTIES

Primary Job Duties – Mechanical Business

Incoming / Supplier Quality:

• Planning of inspection / lead reduction of incoming activities at HQ via factory direct shipment initiative

• Coordinate investigation of quality issues with factory/supplier

• Coordinate MRB review meeting to ensure NCMR are investigate and processed in a timely manner

• Participate in supplier qualification process / performance trending

• Review and prepare inspection reports for shipment

• Lead supplier audit programme

NPI / First Article Inspection & Qualification:

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Support FA source inspection, review FA documentation for completeness and submit FA package for Qualification

• Conduct review meeting to ensure completeness of manufacturing documentation after FA Qualification approval

Quality Improvement / Complaint handling

• Liaison between customer and factory/supplier on quality issues and support recovery plan

• Coordinate investigation and root cause analysis

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

• Execute quality improvement action plan

• Participate in customer weekly meetings

Secondary Job Duties - Quality System / Continuous improvement

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Lead preparation and handling of customer audits

• Lead improvement / project rollouts

CANDIDATE REQUIREMENTS

Experience:

• 5-8 years experience in an Optics / Manufacturing / Precision Engineering environment

Qualifications:

• Degree in Mechanical Engineering or equivalent

Other Requirements:

• Proficient in English and Chinese language to communicate with customers from Asia, Europe, and USA

• Able to travel to China and Malaysia to support business needs

Key Competencies Required For the Job

• Experienced in the field of Optics / Manufacturing / Precision Engineering environment

• Good understanding in the implementation of QMS (ISO 9001/13485), Quality Assurance and Quality Control methodology

• ISO 9001:2015 Internal Auditor Trained

• Strong understanding in the use of Quality & Process Controls tools (CAPA, 5 Why, Risk assessment, control plan, SPC, metrology, and inspection techniques)

• Able to interpret Engineering drawings

• Critical thinker, Independent, resourceful, and motivated to pick up new skills

PURPOSE OF JOB

Supporting WEO Mechanical business, the ideal candidate shall be equipped with precision machining manufacturing experience.

The individual will work closely with WEO manufacturing sites to ensure product quality is sustained throughout the manufacturing lifecycle of the product. You will facilitate the assessment, identification, correction, and prevention of quality issues via risk analysis and root cause analysis tools.

Reporting to the department head, you will assist in the planning and execution of the corporate quality strategy and tactical action plans rollout. You will be responsible for quality planning and establishing and maintaining metrics to improve quality system processes, process capability, reliability, and quality of the products.

JOB DUTIES

Primary Job Duties – Mechanical Business

Incoming / Supplier Quality:

• Planning of inspection / lead reduction of incoming activities at HQ via factory direct shipment initiative

• Coordinate investigation of quality issues with factory/supplier

• Coordinate MRB review meeting to ensure NCMR are investigate and processed in a timely manner

• Participate in supplier qualification process / performance trending

• Review and prepare inspection reports for shipment

• Lead supplier audit programme

NPI / First Article Inspection & Qualification:

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Support FA source inspection, review FA documentation for completeness and submit FA package for Qualification

• Conduct review meeting to ensure completeness of manufacturing documentation after FA Qualification approval

Quality Improvement / Complaint handling

• Liaison between customer and factory/supplier on quality issues and support recovery plan

• Coordinate investigation and root cause analysis

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

• Execute quality improvement action plan

• Participate in customer weekly meetings

Secondary Job Duties - Quality System / Continuous improvement

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Lead preparation and handling of customer audits

• Lead improvement / project rollouts

CANDIDATE REQUIREMENTS

Experience:

• 5-8 years experience in an Optics / Manufacturing / Precision Engineering environment

Qualifications:

• Degree in Mechanical Engineering or equivalent

Other Requirements:

• Proficient in English and Chinese language to communicate with customers from Asia, Europe, and USA

• Able to travel to China and Malaysia to support business needs

Key Competencies Required For the Job

• Experienced in the field of Optics / Manufacturing / Precision Engineering environment

• Good understanding in the implementation of QMS (ISO 9001/13485), Quality Assurance and Quality Control methodology

• ISO 9001:2015 Internal Auditor Trained

• Strong understanding in the use of Quality & Process Controls tools (CAPA, 5 Why, Risk assessment, control plan, SPC, metrology, and inspection techniques)

• Able to interpret Engineering drawings

• Critical thinker, Independent, resourceful, and motivated to pick up new skills

PURPOSE OF JOB

Supporting WEO Mechanical business, the ideal candidate shall be equipped with precision machining manufacturing experience.

The individual will work closely with WEO manufacturing sites to ensure product quality is sustained throughout the manufacturing lifecycle of the product. You will facilitate the assessment, identification, correction, and prevention of quality issues via risk analysis and root cause analysis tools.

Reporting to the department head, you will assist in the planning and execution of the corporate quality strategy and tactical action plans rollout. You will be responsible for quality planning and establishing and maintaining metrics to improve quality system processes, process capability, reliability, and quality of the products.

JOB DUTIES

Primary Job Duties – Mechanical Business

Incoming / Supplier Quality:

• Planning of inspection / lead reduction of incoming activities at HQ via factory direct shipment initiative

• Coordinate investigation of quality issues with factory/supplier

• Coordinate MRB review meeting to ensure NCMR are investigate and processed in a timely manner

• Participate in supplier qualification process / performance trending

• Review and prepare inspection reports for shipment

• Lead supplier audit programme

NPI / First Article Inspection & Qualification:

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Support FA source inspection, review FA documentation for completeness and submit FA package for Qualification

• Conduct review meeting to ensure completeness of manufacturing documentation after FA Qualification approval

Quality Improvement / Complaint handling

• Liaison between customer and factory/supplier on quality issues and support recovery plan

• Coordinate investigation and root cause analysis

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

• Execute quality improvement action plan

• Participate in customer weekly meetings

Secondary Job Duties - Quality System / Continuous improvement

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Lead preparation and handling of customer audits

• Lead improvement / project rollouts

CANDIDATE REQUIREMENTS

Experience:

• 5-8 years experience in an Optics / Manufacturing / Precision Engineering environment

Qualifications:

• Degree in Mechanical Engineering or equivalent

Other Requirements:

• Proficient in English and Chinese language to communicate with customers from Asia, Europe, and USA

• Able to travel to China and Malaysia to support business needs

Key Competencies Required For the Job

• Experienced in the field of Optics / Manufacturing / Precision Engineering environment

• Good understanding in the implementation of QMS (ISO 9001/13485), Quality Assurance and Quality Control methodology

• ISO 9001:2015 Internal Auditor Trained

• Strong understanding in the use of Quality & Process Controls tools (CAPA, 5 Why, Risk assessment, control plan, SPC, metrology, and inspection techniques)

• Able to interpret Engineering drawings

• Critical thinker, Independent, resourceful, and motivated to pick up new skills

PURPOSE OF JOB

Supporting WEO Mechanical business, the ideal candidate shall be equipped with precision machining manufacturing experience.

The individual will work closely with WEO manufacturing sites to ensure product quality is sustained throughout the manufacturing lifecycle of the product. You will facilitate the assessment, identification, correction, and prevention of quality issues via risk analysis and root cause analysis tools.

Reporting to the department head, you will assist in the planning and execution of the corporate quality strategy and tactical action plans rollout. You will be responsible for quality planning and establishing and maintaining metrics to improve quality system processes, process capability, reliability, and quality of the products.

JOB DUTIES

Primary Job Duties – Mechanical Business

Incoming / Supplier Quality:

• Planning of inspection / lead reduction of incoming activities at HQ via factory direct shipment initiative

• Coordinate investigation of quality issues with factory/supplier

• Coordinate MRB review meeting to ensure NCMR are investigate and processed in a timely manner

• Participate in supplier qualification process / performance trending

• Review and prepare inspection reports for shipment

• Lead supplier audit programme

NPI / First Article Inspection & Qualification:

• Participate in NPI / FA drawing review meetings with factory to align test acceptance criteria and inspection test plans

• Support inspection correlation activities between customer and factory

• Support FA source inspection, review FA documentation for completeness and submit FA package for Qualification

• Conduct review meeting to ensure completeness of manufacturing documentation after FA Qualification approval

Quality Improvement / Complaint handling

• Liaison between customer and factory/supplier on quality issues and support recovery plan

• Coordinate investigation and root cause analysis

• Verification of effectiveness and ensure timely closure of CAPA/SCAR

• Execute quality improvement action plan

• Participate in customer weekly meetings

Secondary Job Duties - Quality System / Continuous improvement

• Support the implementation and maintenance of QMS according to ISO 9001/14001 requirements

• Lead preparation and handling of customer audits

• Lead improvement / project rollouts

CANDIDATE REQUIREMENTS

Experience:

• 5-8 years experience in an Optics / Manufacturing / Precision Engineering environment

Qualifications:

• Degree in Mechanical Engineering or equivalent

Other Requirements:

• Proficient in English and Chinese language to communicate with customers from Asia, Europe, and USA

• Able to travel to China and Malaysia to support business needs

Key Competencies Required For the Job

• Experienced in the field of Optics / Manufacturing / Precision Engineering environment

• Good understanding in the implementation of QMS (ISO 9001/13485), Quality Assurance and Quality Control methodology

• ISO 9001:2015 Internal Auditor Trained

• Strong understanding in the use of Quality & Process Controls tools (CAPA, 5 Why, Risk assessment, control plan, SPC, metrology, and inspection techniques)

• Able to interpret Engineering drawings

• Critical thinker, Independent, resourceful, and motivated to pick up new skills

What the role is

The Quality Service Branch (QSB), under the Clean Environment Group (CEG), handles cases related to pollution control and wastes management matters. In this role, we are looking for highly-motivated, dynamic and service-oriented individual to handle feedback, appeal and enquiries related to pollution control and waste management related issues. In addition, you will perform a wide range of duties focused on monitoring trends, and data analysis on various types of feedback to support ground operations. You will report to the Senior Assistant Director of CEG/QSB.

You will work in partnership with line departments and operations sections within Pollution Control 1 Division, Pollution Control 2 Division, Environmental Monitoring and Modelling Division and Waste Management Division, to ensure effective handling of feedback and appeal cases received from members of the public and stakeholders.

What you will be working on

You will be responsible for the following:

• Draft reports and replies and handle all cases from People, Private and Public sectors, including complex and sensitive cases, on pollution control and waste management matters in accordance with guidelines and Standard Operating Procedures and within service standards
• Review feedback and collaborate with operations and/or other agencies to understand customer issues where required, to identify gaps in service delivery and drive improvements/changes to service experience, processes, policies, and standards, including communication strategies and replies to ensure relevance and realism to changing customer servicescapes
• Partner, support and contribute to platforms and initiatives aimed at driving service excellence within NEA, for example, service events, newsletter, initiatives, etc.
• Analyse feedback data and garner insights from customer satisfaction surveys to sense and sense-make, and to propose improvement plans.
• Identify key customer segments, provide department-perspective to develop service strategies to meet current and future requirements of the customer segments.
• Provide support and advice to officers on service-related queries, for example, guidelines/SOPs, service standards, case handling, direct cases to appropriate parties, etc.
• Document institutional knowledge on unique cases of feedback for training and future reference
• Identify staff and/or projects eligible for reward recognition and prepare documentation for service award nomination

What we are looking for

• Good understanding of and keen interest on environmental protection issues including pollution control and wastes management issue
• A good team player with excellent communication, interpersonal and investigation skills
• Excellent communication skills and emotional intelligence, with ability to think logically
• Meticulous, good analytical and writing skills, and able to identify emerging issues for quick resolution
• Organised and able to multi-task
• Independent and resourceful with pleasant personality and enjoy working with others
• Highly resilient and able to handle adverse situations and difficult customers
• Self-driven, strong leadership skills and always ready to strive for improvement
• As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

To apply, please proceed to https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-2-BUKIT-MERAH-CENTRAL/Assistant-Director-Executive-Manager--Quality-Service-Branch----Contract_JR-10000029599-1

My client, a rapidly expanding pharma company is looking out for a Director of quality - Pharma Products and CoE, for their business regions.

Details of the roles as mentioned below:

Role Objectives:

• Ensure consistent high-quality standards for patients and consumers across our prescription products.
• Lead a team of Quality professionals overseeing Quality Operations for the prescription portfolio and products requiring elevated quality oversight.
• Coordinate process improvements from regional quality operations teams to enhance global quality processes.
• Oversee quality aspects of manufacturing and distribution partners related to prescription products.

Role Responsibilities:

• Leadership in Change and Transformation:
• Provide clear guidance to the global prescription products operations team to align quality operations with business objectives.
• Define and communicate clear objectives for the Global Prescription Products and Global Center of Excellence QA team, emphasizing the need for business acumen alongside quality perspectives.

Team Management:

• Ensure each QA member has a performance plan aligned with business and department objectives.
• Monitor and enhance QA team productivity, reporting progress to the executive management team through metrics.
• Foster partnerships between QA team members and the business to support overall business success.
• Direct operations of the QA operations group.

Collaboration and Stakeholder Management:

• Act as an integral member of the Quality Ops Leadership team.
• Partner with various functional leaders to achieve business outcomes.

Additional Skills and Attributes:

• Ability to lead effectively through times of crisis and ambiguity.
• Minimum of 10 years of experience in the Life Sciences, Pharmaceutical, or Consumer Healthcare industry.
• Tertiary qualification (BSc or equivalent) in chemistry, pharmacy, or related discipline; post-graduate qualifications preferred (science or business).
• Strong background and expertise in quality management with a focus on overall business requirements.

How to Apply:

Interested applicants may apply by sending in your updated résumé (in MS Word format) to my email or apply directly:

Consultant: Tan Jun Jie

EA personnel reg. no.R1878852

EA License No. 17C8502