Total 133 Senior Executive software test engineer job vacancies in Maintenance / Repair category in Malaysia

COMMISSIONING ENGINEER

Job Description:

To co-ordinate and perform installation, pre & post commissioning, and testing activities according to project schedule and requirements in a cost-efficient manner.
To attend schedule and unscheduled maintenance.
To assist in identify/ diagnose/ investigate/ trouble shoot and analyze for solutions.
To monitor and manage site work progress, record all results, witness final test, acceptance of equipment and documents compilation.
To prepare relevant reports such as pre-commissioning, commissioning, comprehensive test report and records.
To provide technical support to end user and in-house service team.
Ensure proper functioning of control systems, instrumentation, safety systems and safe working at site at all times.
To prepare, compile & filing of drawings, reports, checklists, photos & etc.
 

Job Requirement:

Candidate must possess at least Diploma/ Professional Degree in Electrical & Electronic Engineering/ Mechatronic/ Electromechanical Engineering or equivalent. 
Preferable with 3 years working experience in installation and commissioning for power plant.
Knowledge of Omron PLC programming, with Siemens and AB will be added advantage.
Well versed in interpret blueprints, electrical schematic drawing, P&ID prints, part lists, maintenance practice, technical knowledge and Health, Safety & Environment requirements.
Proficient in both oral and written in English.
Computer literate in Microsoft, Adobe, AutoCAD.
Preferable candidate with excellent interpersonal, patience, passion with work and teamwork.   
Willing to travel domestically and internationally when required.
Able to work independently, willing to work long hours . self-motivated, good communication skills.
 

 

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Company trips
• Medical insurance
• Work visa sponsorship

調試工程師

職位描述：

根據專案進度和要求，以具有成本效益的方式協調和執行安裝、前後調試以及測試活動。
參加計劃內和計劃外的維護。
協助識別/診斷/調查/排除故障並分析解決方案。
監控和管理現場工作進度，記錄所有結果，見證最終測試，設備驗收和文件編制。
準備預調試、調試、綜合測試報告和記錄等相關報告。
為最終用戶和內部服務團隊提供技術支援。
請務必確保控制系統、儀表、安全系統正常運作以及現場安全工作。
準備、編譯和歸檔圖紙、報告、清單、照片等。

職位需要：

候選人必須至少擁有電機與電子工程/機電一體化/機電工程文憑/專業學位或同等學歷。
具3年以上電廠安裝、調試工作經驗者佳。
懂歐姆龍PLC編程，配合西門子、AB會更佔優勢。
精通解釋藍圖、電氣原理圖、P&ID 列印、零件清單、維護實務、技術知識以及健康、安全和環境要求。
精通英語口語和書面表達。
精通 Microsoft、Adobe、AutoCAD 電腦。
具有良好人際關係、耐心、工作熱情和團隊合作精神的優先候選人。
願意根據需要進行國內和國際出差。
能夠獨立工作，願意長時間工作。自我激勵，良好的溝通能力。

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 公司旅行
• 醫療保險
• 工作簽證贊助

Job Responsibilities:

• Lead/Participate in machine troubleshooting and, inclusive of Abnormal machine breakdown, troubleshooting machine, define machine operating SOP and troubleshooting guide.
• Support machine PM schedule activity and autonomous maintenance.
• Develop and implementation of TPM program, Preventive and Predictive Maintenance, including spare parts inventory & service contracts, to enhance Manufacturing Equipment performance.
• Understanding, Implementation and buy-off of new Manufacturing Equipment develop by Equipment Development team. Ensure Equipment manual and procedure are in place. Coordinate the training of new equipment with the Equipment Development team.
• Collaborate with and manage suppliers to support running of AM processes, machine development and automation solution for industrialize 4.0.
• Institute operational efficiency and/or machine/process improvements targeted to reduce machine cycle time, increase machine availability, and increase throughput.
• Prepare and deliver training documentation/support and response procedures to elevate the ability of technicians/ operators to address common problems.
• Participate and resolve internal or external issue with Cross Functional team.
• Provide guidance to Technician and Associate Engineer

Job Requirement:

• Minimum bachelor’s degree in engineering (Mechanical / Electrical / Mechatronics) or Technical Diploma with more than some related working experience will be considered.
• 6 Sigma Certification is an added advantage.
• Experience in assembly material manufacturing industry and dealing with Electro-Mechanical Equipment is preferred.
• Experience in lead a team will be an added advantage
• Assembly Material/Semiconductor related knowledge and practical experience prefer.
• Knowledge in paste manufacturing and application (Die Attach paste) is highly advantageous.
• Knowledge in solder wire manufacturing and application is highly advantageous.
• Experience in resolving a manufacturing process and product issues independently.
• Strong problem analysis, troubleshooting and solving skills.
• Knowledge in statistical tools (SPC, Minitab/JMP) will be preferred.
• Good machine machinery understanding of process technology and applicable methodologies.
• Good knowledge in Electrical and/or Mechanical.
• Up to date with current equipment and processes available in the commercial market.
• Ability to create customized solutions, and propose customizable equipment, necessary for process improvements.
• Able to have systematic troubleshooting skill and tools knowledge for machine issue troubleshooting.
• Strong in systematic approach, establish system and documentation.

Other Information:

• Work Location: Pioneer (company transport provided)
• Monday to Friday: 8.15am to 5.15pm

INSTALLATION AND SERVICE COMPANY OPEN VACANCIES FOR

Position: Building Facilities Engineer / Executive

Salary: $3200 - $3500

Working Hours - 8:30am to 6:00pm (5 Days Work Week)

Location: Kaki Bukit

✅ 2-3 Relevant Working Experiences

✅ Bilingual in English & Chinese

▶ Interested applicants, may send me your updated CV with a recent photo:

Senior Instrumentation Engineer










Country/Region:  AU







State:  WA







City:  Perth







Job ID:  3854
















About Us


 
Fortescue is both a proud West Australian company and a global green solutions business. We are recognised for our culture, innovation and industry-leading development of infrastructure, mining assets and green energy initiatives.




Our Opportunity


 
 
Work location : Perth based (Redcliffe or Hazelmere)
 
 









... Click here to view more detail / apply for Senior Instrumentation Engineer

1. Technical / Calibration Services

• Responsible for the calibration or repair of equipment in 1 to 2 disciplines (Dimensional, Mechanical, Electrical or Temperature).
• Set up and operate a variety of precision gages and instruments to inspect and calibrate equipment to accurate specifications and metrological standards.
• For senior positions, resolves or set up instruments to resolves more complex calibration procedures or matters that may be escalated by the junior team members. Inspect and check work of junior team members.
• Ensures all calibration reports or service reports are completed accurate on-line and on the printed reports. Responsible for reviewing the calibration results and ensuring reports are completed before submission to Approved Signatory. She/he will need to ensure these reports captured accurate data with calculated uncertainty and results correct and traceable before the approval by the Approved Signatory.
• If designated as Approved Signatory, S/he will be accountable for the completeness and traceability of the reports signed.
• For senior positions, escalates and/or discuss recurring calibration conflicts / difficulties and work closely with the Manager to identify root causes and to implement corrective actions / procedures.
• Check internal tools / equipment for performing the calibration / repair and ensure these are up to standards and to escalate when necessary.
• Work duties may be performed within laboratory environment or on multiple customers’ site on same day.
• For senior positions, assist in the scheduling of work to team members daily. S/he will also be expected to assist in correcting non-conforming actions of team members and monitors the progress.

2. Process improvements / Quality Control

• Actively participates in discussions with manager to improve and validate calibration methods / procedures with the objectives to improve accuracy and work efficiency for the department.
• For senior positions, work closely with Technical Manager, Assistant Technical Manager to identify the need to purchase equipment for improving Quality / efficiency / reducing operational costs.
• S/he is expected to participate in Internal Quality Control, Inter-laboratory Comparison and Proficiency testing Programmes.
• Maintain good safety and housekeeping

3. Team Management (for senior positions)

• Actively participates in team-bonding activities and to foster team-work / cooperation amongst team members.
• Gives immediate feedback to team members to ensure they adhere and conform to the Company’s Quality policy, regulations, Health and Safety standards and others.

Requirements:

• Demonstrates understanding of tools used for the calibration for at least 1 discipline (Mechanical, Dimensional, Electrical or Temperatures).
• Senior positions: Possess Diploma in Engineering (Electronics / Electrical) or any relevant Engineering/Technical areas.
• Junior positions: Minimum of O' Levels or equivalent
• Valid Class 3 Driving License
• Computer skills – Proficient of MS Word, Email and Excel and computer systems for capturing accurate data (calibration results, etc) and generating reports.
• Customer-Service oriented and understand the urgency or need to meet customer’s deadline.
• Efficient time management with initiative and wants to improve.
• Team-player.
• Physically fit and good dexterity especially with repeating calibration procedures.
• Direct calibration experience will be an advantage.

5-day work week, Monday to Friday.

Work trials are available for interested candidates who do not have direct calibration experience, to determine suitability for the role. There are multiple positions available at different rankings, respective job descriptions may be different. Please indicate your relevant experience.

We thank all applicants for their interest and apologize that only shortlisted applicants will be contacted for an interview.

Who we are:
We are a leading operator in Australia and New Zealands fast-growing Out Of Home advertising industry and our purpose is to make public spaces better! As an ASX listed company with 800 team members, we create deep engagement between people and brands through Unmissable location-based media solutions that inform, entertain, and inspire. Our network is unparalleled, with a diverse portfolio of 37,000 classic and digital signs across roadside, retail, airport and place-based media offering in CBD office towers and universities. 
Our culture:
Join an organisation united by drive, creativity, innovation, and community. We show up and we are all here to be bold, to be brave and to push the boundaries in Out Of Home advertising. United by our commitment to imagination, you will have the opportunity to collaborate with diverse, talented, and dedicated colleagues across Australia and New Zealand who are all passionate ... Click here to view more detail / apply for Senior Machine Learning Engineer

Let’s talk about the team

Join our Center of Excellence for Generative AI Team as a Senior Machine Learning Engineer (MLE) to advance Generative Artificial Intelligence (Gen AI) and Machine Learning (ML) initiatives that drive our business in an “AI First” approach. ResMed's commitment to improving the lives of sleep apnea patients through our extensive sleep data offers unparalleled opportunities for AI/ML innovation. In this role, you'll spearhead projects that transform patient care, provider experience, and operations efficiencies through AI.

Let’s talk about the role

As a Senior MLE, you'll not only build production-grade generative AI applications, but also develop guardrails, perform model benchmarking, and foster best practices. This involves transforming technical specs into AI/ML systems, encompassing development, testing, and monitoring. You’ll work closely with management, product management, and delivery functions to help develop technical roadmaps. You’ll help drive the adoption of generative AI across the organization by consulting product teams on their generative AI products and communicating the opportunities and limitations of generative AI to a broad audience of stakeholders. You will be working with high-achieving teammates in a global team.

Let's talk about responsibilities

• Work in a high-performing team to design and implement cutting-edge internal and external generative AI products.
• Develop guardrails, benchmarks, and best practices around generative AI.
• Spearhead the creation of POC and MVP applications to demonstrate AI/ML model value.
• Develop and deploy scalable, production-grade AI/ML.
• Facilitate design sessions to address complex AI challenges, offering insights to various company levels.
• Collaborate with cross-functional stakeholders from product management, operations, and data science to develop and deploy scalable production models.
• Mentor junior team members and foster best coding practices.

Let's talk about qualifications and experience

Qualifications

• Either: Masters or PhD in computer science, data science, or other quantitative field and 3+ years of industry experience in Machine Learning Engineering, Data Science, Data Engineering, or related fields.
• Or: 5+ years of industry experience in Machine Learning Engineering, Data Science, Data Engineering, or related fields.
• Extensive experience with Machine Learning systems, including feature/data pipelines, model training, and inference.
• Experience with natural language processing, including text processing, regex, feature engineering, and modeling.
• Expertise in Python coding.
• 5+ years of experience with AWS or other cloud platforms.
• Solid track record of serving ML models in production.

Preferred Qualifications

• Extensive experience in infrastructure tools like Terraform.
• Experience with DevOps (deployments, observability, model monitoring), unit tests, and best coding practices.
• Previous experience with generative AI.
• Advanced knowledge of RESTful APIs, and industry-standard architectural design patterns.

Let’s talk about what you can expect

• A supportive environment that focuses on people's development and best implementation
• Opportunity to design, influence, and be innovative
• Work with inclusive global teams and the open sharing of new ideas. We want your ideas!
• Be supported both inside and outside of the work environment
• The opportunity to build something meaningful and see a direct positive impact on people’s lives!
• Dream big, iterate and experiment to drive innovation.

Job Description
About you and this role:

As an Instrument Engineer/Senior Hardware Discipline Engineer you will be responsible for providing specialist technical support to the site maintenance and operations functions and for ensuring the site complies with all regulatory requirements relating to the safe installation, operation and maintenance of instrumentation systems. Your role is based at Dow Silicones Barry site in South Wales and is one of the largest and most complex silicones sites in the world. Barry is situated less than 10 miles from Cardiff city center, which is home to Europe's largest waterfront development and combines the practical advantages of a small, friendly city with the cultural and recreational amenities of a successful modern capital.

Responsibilities:

Provide technical support and advice on equipment failures, root cause investigation, reliability improvements, facility and equipment strategies.
Provide instrument engineering support to projects including front end design inputs, reliability and operability advice, and commissioning support.
Provide instrumentation expertise to Process Hazard Review & Process Hazard Analysis, alarm reviews and safety audits.
Develop, maintain and apply standards and procedures for the design and maintenance of instrumentation systems.
Maintain and update instrument documentation including datasheets, loopsheets and schematics
Have working knowledge of Hazardous Area Classification, Electrostatics and the ATEX directives
Share knowledge internally/externally via technical resource network forums
Deliver technical presentations and training material
Ensure instrumentation represented on PIDs is correct
Carry out safety and reliability root cause investigations
Support major maintenance activities e.g. plant shutdowns
Troubleshooting and fault finding instrument & PLC systems
You should have excellent influencing and motivational skills and have a strong commitment to safety.
Qualifications:

Minimum of Bachelor’s degree in Instrument/Control Engineering, Electrical Engineering or related field. Masters preferred, and working towards Chartered Status.
Minimum 5 years instrument engineering experience in an operational environment is preferred, (at a COMAH facility in the chemical or petrochemical sector), but not required.
Understand relevant legislative requirements, (Electricity at Work Regulations, DSEAR, ATEX, BS7671 etc)
Additional notes

No relocation support provided for this position.

Responsibilities

• The avionics technician is accountable for installing, testing, adjusting, or repairing aircraft components, including the radio, radar, navigation, and missile control systems.
• They utilize circuit testers, oscilloscopes, and voltmeters to assess and diagnose various components, devices, and assemblies.
• Ensuring the proper functioning of electrical systems and equipment through rigorous testing is part of their duties.
• They also investigate and troubleshoot any issues with equipment or system operations.
• Moreover, they conduct scheduled maintenance, problem-solving, and inspections before, during, and after flights.
• Additionally, they are responsible for procuring supplies, equipment, components, and materials necessary for general maintenance and repairs.

Requirements

• Relevant experience in the Avionics Industry.
• Strong experience in aircraft avionics / electronics is highly advantageous.
• Capable to do rotating shift work.
• Job Location can be either West or East
• Salary remuneration is dependent on working experience. Fresh candidates with strong aircraft engine / airframe or avionics background are welcome to apply

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• Execute control system life cycle management programs which include control system inventory, obsolescence plans, managing spare parts and upgrade/replacement planning.
• Support control system maintenance and test planning as required, software upgrades, ESD testing, offline and online testing, and coordination of activities with/without plant shutdowns
• Support metering systems maintenance planning including for custody transfer, allocation, regulatory, and leak detection applications
• Support planning and coordination of tasks related to control system's IT security and cybersecurity.
• Evaluate and comment on work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with project specifications, company standards, and regulatory requirements.
• Review systems for compliance with company’s Industrial Control System Requirements (ICSR) to minimize cybersecurity threats.
• Review update and develop instrument and controls technical documentation / drawings including P&IDs, cause and effect, and control narratives.
• Ensure accurate and timely communication among the Project Team and other Company functions.
• Travel to production affiliate office/facility locations for onsite support or rollout of new global support initiatives.

Requirements:

• Bachelor’s degree in Information Technology, Electrical Engineering or related engineering specialty
• At least 15 years of experience in instrumentation and controls engineering, must be able to review, evaluate, and update cause and effect, P&IDs, logic and architecture diagrams and control narratives, in supporting Chemical, Petrochemical, or Refinery plant for instrumentation and controls engineering, design, and commissioning.
• At least 2 to 5 years’ hands-on experience on Smart Plant Instrumentation (SPI) software and database
• At least 2 years’ practical experience in setting up and review control system's IT and Cybersecurity measures.
• Experience with Control Systems – DCS, ESD (SIS), PLC, package control systems, Control System Specification, Architecture Design, Communication Protocols, Profibus, Modbus etc.
• Highly proficient in Schneider, Yokogawa, Honeywell, and Siemens system
• Have extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Have experience in selection, application, and ISA data sheet specification of hardware including pressure/ temperature /level instruments, control valves, shutdown valves, and fire/gas detection.

Life at Grab
At Grab, every Grabber is guided by The Grab Way, which spells out our mission, how we believe we can achieve it, and our operating principles - the 4Hs: Heart, Hunger, Honour and Humility. These principles guide and help us make decisions as we work to create economic empowerment for the people of Southeast Asia.

Get to know the Team
GrabAds allows Advertisers, Agencies, and Merchants to engage the Grab Audience via innovative online and offline advertising experiences. Through our unique ecosystem and transacting user base, our clients are able to reach their desired audiences at scale, while driving measurable business outcomes. We would want to invite talented and passionate engineers to join our journey, to create value for our consumers, drivers, merchants, and advertising partners, while continuing to make everyday lives better across Southeast Asia.

Get to know the Role
You will develop machine learning models and strategies to predict the most relevant items in the user journey. You will drive real-world impact through innovative data-driven technology. You will drive the development and iteration of the algorithm and ensure that improvements roll out successfully.

The Day-to-Day Activities

• Conceptualise and develop machine learning models to understand, classify and predict user behaviors in different scenarios. Deploy, test and maintain them.
• Design and conduct both offline and online experiments to validate hypotheses.
• Design and implement algorithms to derive deep insights and identify trends, patterns and relationships from high-volume high-dimensional data.
• You are required to participate in code and design reviews with peers to maintain our high-standard engineering practice.
• You will participate in on-call rotations with engineers. Troubleshoot, mitigate, and resolve issues.

The Must-Haves

• You have Heart, Hunger, Honour and Humility.
• Master's Degree or above in Computer Science, Electrical Engineering, Software Engineering, Automation, Data Science, or other Computer Science related majors.
• You have a minimum of 2 years of relevant experience in developing Machine Learning models for systems including Ads/RecSys/Search.
• Be familiar with model optimization methods and tricks, and be familiar with deep learning frameworks (TensorFlow/ps-lite/PyTorch)
• Familiar with one or more of the following programming languages: Python/Golang/Java/C++
• Be familiar with the Hadoop ecosystem, and be familiar with modern data processing stacks (e.g. Hive, Presto, Spark, Kafka, HBase, Flink etc.)
• Strong understanding of statistics, data analysis, and data visualization techniques.
• Excellent communication and collaboration skills with a team-oriented mindset, with the ability to work effectively with cross-functional teams.

The Nice-to-Haves

• Be proactive and always be ready to tackle challenging tasks.
  Collaborating with multiple teams to facilitate rapid growth and development.
• Be familiar with user behavior modeling, feature crossing technique, bid optimization strategy including oCPC, and keyword recommendation.
• Proven track record/ accolades in data/ AI-related competitions (e.g. KDD Cup/Kaggle) or programming competitions (e.g. ICPC).
• Proficient in one or more of the following programming languages: Golang/Java/C++/Scala
• Experience in machine learning with cloud platforms (e.g. AWS)
  

Our Commitment
We are committed to building diverse teams and creating an inclusive workplace that enables all Grabbers to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation and other attributes that make each Grabber unique.

Job Description
About you and this role:

As a Senior Maintenance Engineer, you are responsible to provide engineering support to address plant issues that are impacting production over a short period of time and Provides technical expertise which may be equipment based or repair technique based that impacts the availability and maintainability of the facility. Your role Requires expanded conceptual and practical knowledge in own job discipline and broadens capabilities.

Responsibilities:

Serves as a subject matter expert in equipment failures and repair techniques during root cause investigations.
Develops maintenance operating discipline.
Provides technical expertise to plant personnel on troubleshooting failures, repairs, and evaluating whether equipment is designed to meet its intended or existing service conditions.
Ensures that work requests include engineering input on repair details and if necessary provides onsite/offsite technical support for deviations from this data, for equipment that is critical for the process.
Ensures repairs, repair techniques and equipment specific training are documented and made available.
Provides maintainability input to Global Project Methodology activities.
Supports the preventive maintenance coordinator, as required, in reviewing spare parts list for existing equipment.
Enters quality, service and product performance information into the reporting system.
Participates in developing the maintenance budget to support the maintenance strategy.
Provides engineering input for work packages to ensure standards are followed, as required. Provides input on development of work orders during development of turnaround work particularly on critical equipment requiring engineering review or input.
Provides equipment reliability and performance data to the technical resource networks for input into equipment purchasing requirements, evaluation of equipment performance, vendor performance, and modifications to MET.
Completes EH&S orientation and all required training. Exhibits safe work behaviors and works safely without injury or insult to the environment. Fulfills all requirements of the production area and/or maintenance area EH&S.
Supports Industrial Hygiene and other EH&S work process activities. Incorporates safety considerations in planning and maintenance implementation. Understands impact of process chemistry with respect to materials of construction or lubrication.
Uses maintenance spending, reliability, and maintenance metrics for assigned area. Understands objectives of the Facility Maintenance Strategy for assigned areas and relevant history of equipment failures.
Analyzes impact of equipment failures on maintenance spending to identify improvement opportunities. Initiates reliability related MOCs and effectively implement change in own area of responsibility in coordination with appropriate leadership. Understands principles of Long Term Cost of Ownership. Analyzes and troubleshoots maintenance spending in assigned area with coaching.
Qualifications:

A Bachelor or Master Degree in Chemical Engineering, Mechanical Engineering, Electrical Engineering, Civil Engineering or Material Science / Metallurgical Engineer.
5+ years of experience is required.
Additional Notes:

Relocation is not supported for this role.

Responsibilities

• Performing installation, inspection, and modification duties within an aircraft falls under the purview of an airframe/engine technician.
• They employ circuit testers, oscilloscopes, and voltmeters to assess and diagnose components, devices, and assemblies.
• Their responsibilities include verifying the proper functioning of electrical systems and equipment through testing.
• They investigate and resolve any issues with equipment or system operations as they arise.
• Additionally, they conduct scheduled maintenance tasks, troubleshoot problems, and conduct pre-flight, turnaround, and post-flight inspections.
• They are also tasked with procuring supplies, equipment, components, and materials needed for general maintenance and repairs.

Requirements

• Relevant experience in the Aerospace industry.
• Strong experience in aircraft engines highly advantageous.
• Capable to do rotating shift work.
• There are multiple projects in West and East Singapore
• Minimum NITEC in Aerospace / Avionics
• Salary remuneration is dependent on working experience. Fresh candidates with strong aircraft engine / airframe or avionics background are welcome to apply

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• Systems design and selection of equipment instrumentation and controls.
• Reviewing of customers’ specifications requirement and drawings.
• Define specifications and scope of work to contractors.
• Startup, testing, commissioning and troubleshooting of plants.
• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control.
• Responsible for Single Line Drawing, Control Schematic drawings.
• Develop engineering capabilities and work with sales team on project proposal and bidding.
• Reviewing of customers' specifications and drawings.
• Execution of projects.
• Preparation of tender activities.

Requirements:

• Recognised degree by PE Board in Electrical / Instrumentation Engineering.
• Minimum 5 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.
• Knowledge in Instrumentation and Control.
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Proficient in AutoCAD, Microsoft Office.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.